hi,
please add support for protocol ISIS. Frr has already support for it:
Description
Description
Details
Details
- Difficulty level
- Unknown (require assessment)
- Version
- -
- Why the issue appeared?
- Will be filled on close
- Is it a breaking change?
- Unspecified (possibly destroys the router)
| Status | Subtype | Assigned | Task | ||
|---|---|---|---|---|---|
| Resolved | FEATURE REQUEST | Viacheslav | T1316 Support for IS-IS | ||
| Resolved | FEATURE REQUEST | Viacheslav | T2495 Add xml for ISIS [conf_mode] | ||
| Resolved | FEATURE REQUEST | c-po | T3779 Backport all 1.4 IS-IS features and configuration to 1.3 except VRF |
Event Timeline
Comment Actions
XML ready
Template for frr.tmpl ready.
python handler "protocols_isis.py"
Configs are not removed, only added
Tested syntax.
set protocols isis FOO dynamic-hostname set protocols isis FOO lsp-mtu '900' set protocols isis FOO lsp-gen-interval '120' set protocols isis FOO lsp-refresh-interval '53' set protocols isis FOO net '49.0000.0000.0000.0001.00' set protocols isis FOO purge-originator set protocols isis FOO set-attached-bit set protocols isis FOO area-password md5 'fndo234' set protocols isis FOO area-password plaintext-password '2349h4239423423clear' set protocols isis FOO domain-password plaintext-password 'fsdfsdfclea' set protocols isis FOO redistribute ipv4 bgp level-1 set protocols isis FOO redistribute ipv4 bgp level-2 set protocols isis FOO default-information originate ipv4 level-1 set protocols isis FOO default-information originate ipv4 level-2 set protocols isis FOO default-information originate ipv6 level-1 'always' set protocols isis FOO level 'level-1' set protocols isis FOO spf-delay-ietf holddown '200' set protocols isis FOO spf-delay-ietf init-delay '55' set protocols isis FOO spf-delay-ietf long-delay '11111' set protocols isis FOO spf-delay-ietf short-delay '234' set protocols isis FOO spf-delay-ietf time-to-learn '9999' set protocols isis FOO redistribute ipv4 bgp level-1 metric '5' set protocols isis FOO redistribute ipv4 bgp level-1 route-map 'FOO-IN' set protocols isis FOO redistribute ipv4 rip level-2 route-map 'FOOJ2' set protocols isis FOO interface eth0 set protocols isis FOO interface eth0 bfd set protocols isis FOO interface eth0 network point-to-point set protocols isis FOO interface eth0 circuit-type 'level-1' set protocols isis FOO interface eth0 hello-interval '12' set protocols isis FOO interface eth0 hello-multiplier '4' set protocols isis FOO interface eth0 hello-padding set protocols isis FOO interface eth0 metric '25' set protocols isis FOO interface eth0 passive set protocols isis FOO interface eth0 password plaintext-password 'nfsdofnsdfpass' set protocols isis FOO interface eth0 priority '25' set protocols isis FOO interface eth0 psnp-interval '23' set protocols isis FOO interface eth0 three-way-handshake
https://github.com/sever-sever/vyos-1x/commit/4830f122f79df455e9b27b3c7dcd89c622b2e7f8
I'll be glad if someone can finish this.
Comment Actions
@Viacheslav, I am unsure if you're able to finish the template and/or work on it more but if you guys ever choose to complete it and add it into rolling then I can test it out in my lab.
I am unsure how much more work is needed but if it's just down to testing then please let me know and I'll get right on it.
Comment Actions
PR https://github.com/vyos/vyos-1x/pull/612
Add IS-IS routing.
R1
set protocols is-is FOO interface dum0 metric '55' set protocols is-is FOO interface eth1 set protocols is-is FOO net '49.0000.0000.0000.0001.00' set protocols is-is FOO redistribute ipv4 connected level-2
R2
set protocols is-is FOO interface dum0 set protocols is-is FOO interface eth1 set protocols is-is FOO net '49.0000.0192.0168.0002.00' set protocols is-is FOO purge-originator set protocols is-is FOO set-attached-bit
R2 show route
vyos@r4-roll# run show ip route is-is
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued route, r - rejected route
I 100.64.0.0/24 [115/20] via 100.64.0.1, eth1 inactive, 00:08:49
I>* 100.64.222.0/24 [115/65] via 100.64.0.1, eth1, 00:08:49
I 192.168.122.0/24 [115/10] via 100.64.0.1, eth1, 00:08:49
I>* 203.0.113.0/24 [115/65] via 100.64.0.1, eth1, 00:08:49Comment Actions
This will be on my list to test here in a little bit. I'm almost done with stuff relating to LDP.
Comment Actions
Perhaps replace config (from_re "interface" | from_re "isis *") delete also and route-maps/prefix-lists from FRR configuration.
https://github.com/vyos/vyos-1x/blob/current/src/conf_mode/protocols_isis.py#L121
Original config
set protocols isis FOO interface eth1 set protocols isis FOO net '49.0001.1921.6800.1002.00' set protocols isis FOO redistribute ipv4 connected level-2 set policy prefix-list EXPORT-ISIS rule 10 action 'permit' set policy prefix-list EXPORT-ISIS rule 10 prefix '203.0.113.0/24' set policy route-map EXPORT-ISIS rule 10 action 'permit' set policy route-map EXPORT-ISIS rule 10 match ip address prefix-list 'EXPORT-ISIS'
Vtysh config
! interface eth1 ip router isis FOO ! router isis FOO net 49.0001.1921.6800.1002.00 redistribute ipv4 connected level-2 ! ip prefix-list EXPORT-ISIS seq 10 permit 203.0.113.0/24 ! route-map EXPORT-ISIS permit 10 match ip address prefix-list EXPORT-ISIS ! line vty !
Add redistribute connected route-map option
set protocols isis FOO redistribute ipv4 connected level-2 route-map 'EXPORT-ISIS'
The original route-map and prefix-list was deleted
! interface eth1 ip router isis FOO ! router isis FOO net 49.0001.1921.6800.1002.00 redistribute ipv4 connected level-2 route-map EXPORT-ISIS ! line vty ! end