Hi it seems "!" operator is not taken anymore :
[edit] vyos@cerbere# set nat destination rule 1000 destination address !10.2.0.213 [edit] vyos@cerbere# set nat destination rule 1000 destination port 53 [edit] vyos@cerbere# set nat destination rule 1000 inbound-interface eth1.2 [edit] vyos@cerbere# set nat destination rule 1000 protocol tcp_udp [edit] vyos@cerbere# set nat destination rule 1000 source address !10.2.0.213 [edit] vyos@cerbere# set nat destination rule 1000 translation address 10.2.0.213 [edit] vyos@cerbere# set nat destination rule 1000 translation port 53 [edit] vyos@cerbere# show nat destination +rule 1000 { + destination { + address !10.2.0.213 + port 53 + } + inbound-interface eth1.2 + protocol tcp_udp + source { + address !10.2.0.213 + } + translation { + address 10.2.0.213 + port 53 + } +} [edit] vyos@cerbere# commit [ nat ] VyOS had an issue completing a command. We are sorry that you encountered a problem while using VyOS. There are a few things you can do to help us (and yourself): - Make sure you are running the latest version of the code available at https://downloads.vyos.io/rolling/current/amd64/vyos-rolling-latest.iso - Consult the forum to see how to handle this issue https://forum.vyos.io - Join our community on slack where our users exchange help and advice https://vyos.slack.com When reporting problems, please include as much information as possible: - do not obfuscate any data (feel free to contact us privately if your business policy requires it) - and include all the information presented below Report Time: 2021-01-05 11:40:41 Image Version: VyOS 1.3-rolling-202101030217 Release Train: equuleus Built by: [email protected] Built on: Sun 03 Jan 2021 02:17 UTC Build UUID: 97831d38-ecb8-4cad-8770-7f32584bad4d Build Commit ID: ba6dab895279f6 Architecture: x86_64 Boot via: installed image System type: KVM guest Hardware vendor: QEMU Hardware model: Standard PC (Q35 + ICH9, 2009) Hardware S/N: Hardware UUID: 93849cbb-6b58-4e0d-9639-588e0618437d Traceback (most recent call last): File "/usr/libexec/vyos/conf_mode/nat.py", line 201, in <module> apply(c) File "/usr/libexec/vyos/conf_mode/nat.py", line 189, in apply cmd(f'{iptables_nat_config}') File "/usr/lib/python3/dist-packages/vyos/util.py", line 179, in cmd raise OSError(code, feedback) PermissionError: [Errno 1] failed to run command: /tmp/vyos-nat-rules.nft returned: exit code: 1 noteworthy: cmd '/tmp/vyos-nat-rules.nft' returned (out): returned (err): /tmp/vyos-nat-rules.nft:11:70-70: Error: syntax error, unexpected ! add rule ip nat PREROUTING iifname "eth1.2" ip protocol tcp ip saddr !10.2.0.213 ip daddr !10.2.0.213 tcp dport { 53 } counter dnat to 10.2.0.213:53 comment "DST-NAT-1000 tcp_udp" ^ /tmp/vyos-nat-rules.nft:13:70-70: Error: syntax error, unexpected ! add rule ip nat PREROUTING iifname "eth1.2" ip protocol udp ip saddr !10.2.0.213 ip daddr !10.2.0.213 udp dport { 53 } counter dnat to 10.2.0.213:53 comment "DST-NAT-1000 tcp_udp" ^ [[nat]] failed Commit failed