Handled in/with T484, hopefully
- Queries
- All Stories
- Search
- Advanced Search
- Transactions
- Transaction Logs
Advanced Search
Apr 18 2019
Apr 7 2019
Mar 27 2019
Mar 17 2019
Feb 8 2019
Dec 10 2018
Tried rc10 with rufus, same problem works in win32diskimager though.
Nov 20 2018
Nov 16 2018
This was resolved by @UnicronNL when the dual-mode ISO was built. As of RC7, the installer now integrates this and can successfully do a UEFI install
Responding to Problem #1 mentioned by kroy at Mon, Nov 5, 7:04 PM.
Nov 14 2018
Nov 13 2018
pstaszewski [3:13 AM]
i just found some prolem with 6.1-dev
when sequence start is
bgpd -> zebra
fib is not filled with all learned routes from bgpd (edited)
sequence start neeed to be
zebra sleep 1sec bgpd
here is how it looks like when i start first bgpd then zebra (local routes interfaces is 349)
ip r | wc -l
349
after 5 mins
ip r | wc -l
349
and here how it looks like when i start zebra - sleep 1 sec and after bgpd
ip r | wc -l
349
after few swcs
ip r | wc -l
4002
after 10 secs
ip r | wc -l
11401
I did some of my own digging, and it seems because Vyos 1.2.x is missing the netplugd daemon.
Nov 12 2018
Options added. Maybe I should make a node for dns and have then all dns settings in there for better visibility.
set service pppoe-server dnsv6-servers
Possible completions:
server-1 Primary DNS server server-2 Secondary DNS server server-3 Tertiary DNS server
I've also reported the issue to FRR: https://github.com/FRRouting/frr/issues/3309
Nov 11 2018
This resolves T983, thank you very much.
https://phabricator.vyos.net/T983
Should be simple to fix
IPv6 pppoe options added.
The last bit is blocked by https://github.com/FRRouting/frr/issues/3308 , but otherwise it's done now.
I couldn't reproduce the issue on my rc6 setup. We'll need exact reproducing steps.
The range feature is quite problematic since IPset doesn't really support ranges, and "ipset -A foo 192.0.2.10-192.0.2.20" really adds 20 addressed to the group "foo". Thus, if you add a range and then add a single address to that range, and then delete that address (or the range), your IPset setup ends up in an inconsistent state where that address is supposed to be there according to the VyOS config, but actually isn't.
I cannot reproduce it in rc6, either with zone-policy or without. I guess the pull request fixed it.
Good catch!
Nov 10 2018
feature below added:
Nov 9 2018
@vtsingaras I merged it in to our repo.
@syncer i see we have no crux branch for pmacct i slacked @dmbaturin
requires additional input
I gotta investigate if that was in 1.1. The NETFLOW target is a kernel module, which is presently not include in our kernel we use.
Pushing to rolling releases tonight.
@UnicronNL merge into rolling and crux, please
Just ran it on a few different machines, VMs, set up RAID/non-RAID. It worked great. Thanks!
From 739d0815786aa642292335e47d14d99a34f0e68d Mon Sep 17 00:00:00 2001 From: Daniel Husand <[email protected]> Date: Fri, 9 Nov 2018 15:03:58 +0100 Subject: [PATCH] T982: soft-reconfiguration inbound now enables correctly on ipv4 peers
@UnicronNL i think you can add it to rolling now so people can test and we add it to next RC
Please note: Kernel Intel driver version is kot always related to Intel out of tree modules. Denverton C3000 NICs work fine with 4.18 atleast so as we run 4.19 we‘re off the hook.
@syncer i added a branch in vyos-build, after testing, do you think we can merge to current/crux and update the live-build package on the build server?
@syncer If we use kernel 4.19 driver version for ethernet is DRV_VERSION "5.1.0-k"
Also cpu should be supported without enabling something i guess.
Will mod the script to update rate on the fly.
vyos@vyos:~$ stty -F /dev/ttyS0 115200 cstopb
@kroy
If you would like to test:
git clone https://github.com/vyos/vyos-build.git
cd vyos-build
git checkout current-uefi
docker build -t vyos-builder .
docker run -it --privileged -v /HOST_PATH_OF_VYOS_BUILD_REPO:/vyos -w="/vyos" vyos-builder bash
./configure
make iso
Tested on the latest, rc.local is executed before the config is applied, which causes the issue.
Nov 8 2018
Step 1 import and debianize from source: https://github.com/vyos/vyos-xe-guest-utilities
I have sent a pull request that adds support for outbound IPv6 queries, implementing what I described above: https://github.com/vyos/vyos-1x/pull/58.