[email protected]:~$ show version Version: VyOS 1.2.0-rolling+201906191227 Built by: [email protected] Built on: Wed 19 Jun 2019 12:27 UTC Build UUID: 1e70dc13-fc6a-4bf3-acd7-db557493e1d1 Build Commit ID: 70366de29543a5
- Queries
- All Stories
- Search
- Advanced Search
- Transactions
- Transaction Logs
Feed Advanced Search
Advanced Search
Advanced Search
Jun 19 2019
Jun 19 2019
c-po moved T1453: Warning: nss-myhostname is not installed from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.2) board.
c-po edited projects for T1453: Warning: nss-myhostname is not installed, added: VyOS 1.2 Crux (VyOS 1.2.2); removed VyOS 1.2 Crux.
c-po moved T1454: Reading deprecated /etc/frr/daemons.conf from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.2) board.
c-po edited projects for T1454: Reading deprecated /etc/frr/daemons.conf, added: VyOS 1.2 Crux (VyOS 1.2.2); removed VyOS 1.2 Crux.
c-po moved T1454: Reading deprecated /etc/frr/daemons.conf from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po added a comment to T1114: VyOS 1.2 tftp issue, NAT client could not boot via tftp server, same setup on VyOS 1.1.8 works fine.
Have you tried set system conntrack modules tftp ?
vyos@vyos:~# grep -r "Reading deprecated /etc/frr/daemons.conf" /var/log /var/log/messages:Jun 19 05:35:38 localhost vyos-router[959]: Reading deprecated /etc/frr/daemons.conf. Please move its settings to /etc/frr/daemons and remove it. ... (warning). /var/log/messages:Jun 19 05:35:39 localhost watchfrr.sh: Reading deprecated /etc/frr/daemons.conf. Please move its settings to /etc/frr/daemons and remove it.
vyos@vyos:~# grep -r nss-myhostname /var/log /var/log/messages:Jun 19 05:35:44 localhost systemd-hostnamed[1323]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
c-po changed the status of T1454: Reading deprecated /etc/frr/daemons.conf from Open to Backport candidate.
c-po moved T1453: Warning: nss-myhostname is not installed from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po changed the status of T1453: Warning: nss-myhostname is not installed from Open to Backport candidate.
Jun 18 2019
Jun 18 2019
c-po placed T1416: 2 dhcp server run in failover mode can't sync hostname with each other up for grabs.
c-po moved T1444: Update Linux Kernel to v4.19.52 from Backlog to Finished on the VyOS 1.2 Crux (VyOS 1.2.2) board.
c-po moved T1451: Intel e1000e driver missing in lates rolling release from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1444: Update Linux Kernel to v4.19.52 from Needs Triage to Backlog on the VyOS 1.2 Crux (VyOS 1.2.2) board.
c-po moved T1444: Update Linux Kernel to v4.19.52 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
Jun 17 2019
Jun 17 2019
c-po moved T1390: Extend bgp config for bestpath as-path multipath-relax from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1390: Extend bgp config for bestpath as-path multipath-relax from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.2) board.
I'd propose adding letsencrypt support for the certificates, too
Jun 16 2019
Jun 16 2019
I‘d keep it as it is as it was previously a bug accessibg the wrong file. As DHCP clients usually request their last assigned address not to many systems will break.
VyOS 1.2.1 ships PowerDNS 4.1.12
c-po moved T1189: [Security Advisory] PowerDNS Recursor 4.1.9 Released from Needs Triage to Finished on the VyOS 1.2 Crux ( VyOS 1.2.0-EPA) board.
@jjakob yes. Each ISO always ships the latest available PowerDNS version that is released and available via https://repo.powerdns.com/
A preliminary CLI interface has been created:
c-po moved T1327: Set the serial console speed to 115200 by default from Finished to In Progress on the VyOS 1.3 Equuleus board.
@jestabro the root cause looks like this line: https://github.com/vyos/vyatta-config-migrate/blob/current/migrate/system/3-to-4#L33-L37
In addition, latest rolling release when beeted from ISO show this behavior in /opt/vyatta/etc/config/config.boot
c-po moved T1438: DMI board/product serial can't be read from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1438: DMI board/product serial can't be read from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.2) board.
c-po renamed T1438: DMI board/product serial can't be read from APU4 board serial number not shown to DMI board/product serial can't be read.
Using an APU4 board this does not work. ISOLINUX has no serial console set, and the kernel command line seems to have no serial interface either.
Please verify the fix with latest rolling release
c-po changed the status of T1433: "show dhcpv6 server leases" shows leases from wrong file from Open to Backport pending.
Jun 15 2019
Jun 15 2019
Also supported in EdgeOS
Jun 12 2019
Jun 12 2019
Jun 11 2019
Jun 11 2019
Why plural and not singular dhcp-option?
Jun 5 2019
Jun 5 2019
c-po changed the status of T1427: Problem compiling VyOS 1.2 Docker Version from Resolved to Invalid.
Just did a fresh build w/o problems - seems you downloaded the sources instead of git clone as suggested by @runborg
Jun 3 2019
Jun 3 2019
c-po added a comment to T1416: 2 dhcp server run in failover mode can't sync hostname with each other.
Unfortunately this was a miss understanding between @zsdc and me, but the provided fix targeted the same direction.
Jun 2 2019
Jun 2 2019
IMHO this was fixed by @rherold and is merged into the latest rolling. Please verify if the issue still exists.
[ 44.984873] igb: loading out-of-tree module taints kernel. [ 44.988636] Intel(R) Gigabit Ethernet Linux Driver - version 5.3.5.22s [ 44.988638] Copyright(c) 2007 - 2019 Intel Corporation.
Jun 1 2019
Jun 1 2019
@SteveP latest ISO has the driver updates, please test.
@dmbaturin is there any reason the IPv6 peer-group is under address-family ipv6-unicast and the IPv4 peer-group is not? Seems this one was missed during migration?
c-po moved T1416: 2 dhcp server run in failover mode can't sync hostname with each other from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1309: allow duplicate ip adresses on different interfaces from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1327: Set the serial console speed to 115200 by default from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1409: Verify if vyatta-iproute package can be replaced by upstream iproute2 package from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1410: Upgrade Linux Kernel to 4.19.46 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T1309: allow duplicate ip adresses on different interfaces from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.2) board.
c-po changed the status of T1416: 2 dhcp server run in failover mode can't sync hostname with each other from In progress to Backport candidate.
c-po added a comment to T1416: 2 dhcp server run in failover mode can't sync hostname with each other.
Please test and verify with latest rolling
May 30 2019
May 30 2019
c-po changed the status of T1416: 2 dhcp server run in failover mode can't sync hostname with each other from Open to In progress.
c-po changed the status of T1309: allow duplicate ip adresses on different interfaces from In progress to Backport candidate.
Its only in the current branch for rolling, not in 1.2.1 crux - but can be backported
c-po moved T1419: Can't delete multiple OSPF passive-interfaces in single commit from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.2) board.
c-po edited projects for T1419: Can't delete multiple OSPF passive-interfaces in single commit, added: VyOS 1.2 Crux (VyOS 1.2.2); removed VyOS 1.2 Crux.
c-po moved T1419: Can't delete multiple OSPF passive-interfaces in single commit from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po updated the task description for T1419: Can't delete multiple OSPF passive-interfaces in single commit.
c-po renamed T1419: Can't delete multiple OSPF passive-interfaces in single commit from Error when deleting OSPF passive-interface/passive-interface-exclude to Can't delete multiple OSPF passive-interfaces in single commit.
Adding some debug code to /opt/vyatta/share/vyatta-cfg/templates/protocols/ospf/passive-interface/node.def (set -x for delete) shows:
c-po updated the task description for T1419: Can't delete multiple OSPF passive-interfaces in single commit.
c-po updated the task description for T1419: Can't delete multiple OSPF passive-interfaces in single commit.
May 29 2019
May 29 2019
If there is a refactoring ongoing please also consider the following change to flatten the PPPoE IPv6 configuration by making use of a present nested node:
May 28 2019
May 28 2019
c-po added a subtask for T476: Update the base system to Debian 10 (Buster): T1132: Build on Debian Buster.
c-po added a parent task for T1132: Build on Debian Buster: T476: Update the base system to Debian 10 (Buster).
c-po renamed T476: Update the base system to Debian 10 (Buster) from Start builds for Debian 9 to Start builds for Debian 10 (Buster).