Page MenuHomeVyOS Platform
Feed Advanced Search

Feb 26 2024

danhusan edited projects for T5811: static dhcp-interface routes not installed, added: VyOS 1.4 Sagitta (1.4.0-epa1); removed VyOS 1.4 Sagitta.
Feb 26 2024, 5:46 PM · VyOS 1.4 Sagitta (1.4.0-epa1)

Feb 12 2024

danhusan added a comment to T5811: static dhcp-interface routes not installed.

@Viacheslav

Feb 12 2024, 1:00 PM · VyOS 1.4 Sagitta (1.4.0-epa1)

Jan 26 2024

danhusan added a comment to T5811: static dhcp-interface routes not installed.

I have conducted additional testing. I can replicate the issue on a fresh VM. It seems the issue arises if the DHCP server is slow to respond upon bootup.

Jan 26 2024, 6:37 PM · VyOS 1.4 Sagitta (1.4.0-epa1)

Jan 24 2024

danhusan added a comment to T5811: static dhcp-interface routes not installed.

Same results here. If I remove the routes and re-add them they work perfectly. The issue only comes up at reboot.

Jan 24 2024, 5:19 PM · VyOS 1.4 Sagitta (1.4.0-epa1)
danhusan added a comment to T5811: static dhcp-interface routes not installed.
[email protected]:~$ show configuration commands | match 111.111.22.227
set protocols static route 111.111.22.227/32 dhcp-interface 'eth0'
Jan 24 2024, 5:01 PM · VyOS 1.4 Sagitta (1.4.0-epa1)
danhusan added a comment to T5811: static dhcp-interface routes not installed.

Issue is back in 1.4.0-rc3

Jan 24 2024, 11:32 AM · VyOS 1.4 Sagitta (1.4.0-epa1)
danhusan reopened T5811: static dhcp-interface routes not installed as "Open".
Jan 24 2024, 11:32 AM · VyOS 1.4 Sagitta (1.4.0-epa1)

Dec 22 2023

danhusan closed T5811: static dhcp-interface routes not installed as Resolved.
Dec 22 2023, 8:35 AM · VyOS 1.4 Sagitta (1.4.0-epa1)
danhusan added a comment to T5811: static dhcp-interface routes not installed.

Confirmed working properly in 1.4.0-rc1

Dec 22 2023, 8:34 AM · VyOS 1.4 Sagitta (1.4.0-epa1)

Dec 8 2023

danhusan created T5811: static dhcp-interface routes not installed.
Dec 8 2023, 6:32 PM · VyOS 1.4 Sagitta (1.4.0-epa1)

Oct 24 2023

danhusan created T5682: create more robust access controls for sshd and snmpd.
Oct 24 2023, 4:21 PM · VyOS 1.5 Circinus, VyOS 1.4 Sagitta

Aug 29 2023

danhusan created T5523: CVE-2023-38802.
Aug 29 2023, 6:37 PM · VyOS 1.3 Equuleus

Jun 22 2023

danhusan created T5309: Issues when trying to remove OSPF configuration.
Jun 22 2023, 6:36 PM · VyOS 1.3 Equuleus (1.3.5)

May 31 2023

danhusan added a comment to T5239: frr 'hostname' missing or incorrect, and domain-name missing totally.

I checked 6 routers, 2 showed the issue. No idea what the impact is. All of them running 1.3.2.

May 31 2023, 6:02 PM · VyOS 1.5 Circinus, VyOS 1.4 Sagitta

May 25 2023

danhusan closed T5236: show wan-load-balance not working after reboot as Invalid.
May 25 2023, 4:30 PM · VyOS 1.4 Sagitta
danhusan added a comment to T5236: show wan-load-balance not working after reboot.

I could have sworn it took quite a while for the wlb.out to be populated when testing earlier on. However as I´ve built out the config a bit more I am now only able to reproduce it a few seconds after reboot - so your theory holds. Let's close out the bug report for now and I´ll reopen if something changes down the line.

May 25 2023, 4:22 PM · VyOS 1.4 Sagitta

May 23 2023

danhusan added a comment to T5236: show wan-load-balance not working after reboot.
danhusan@vyos-1:~$ cat /var/run/load-balance/wlb.out
cat: /var/run/load-balance/wlb.out: No such file or directory
May 23 2023, 12:47 PM · VyOS 1.4 Sagitta

May 22 2023

danhusan added a comment to T5236: show wan-load-balance not working after reboot.

Further testing reveals that re-connecting the interfaces after reboot solves the issue:

May 22 2023, 7:42 PM · VyOS 1.4 Sagitta
danhusan created T5236: show wan-load-balance not working after reboot.
May 22 2023, 4:06 PM · VyOS 1.4 Sagitta

Feb 14 2023

danhusan added a comment to T3700: Support VLAN tunnel mapping of VLAN aware bridges.

https://github.com/FRRouting/frr/pull/12364
riw777 merged commit 91b6db4 into FRRouting:master Feb 14, 2023

Feb 14 2023, 2:24 PM · VyOS 1.4 Sagitta

Oct 13 2022

danhusan awarded T1237: Static Route Path Monitoring, failover a Orange Medal token.
Oct 13 2022, 1:02 PM · VyOS 1.4 Sagitta

Sep 18 2022

danhusan closed T3155: ospfv3 mtu-ignore not working on ethernet vifs as Resolved.
Sep 18 2022, 4:41 PM · VyOS 1.2 Crux

Sep 16 2022

danhusan awarded T4702: Wireguard peers configuration is not synchronized with CLI a Love token.
Sep 16 2022, 5:05 PM · VyOS 1.3 Equuleus (1.3.3), VyOS 1.4 Sagitta

Aug 11 2022

danhusan closed T4476: Next steps after installation is not communicated properly to new users as Resolved.
Aug 11 2022, 7:04 PM · VyOS 1.3 Equuleus ( 1.3.1)

Jun 21 2022

danhusan created T4476: Next steps after installation is not communicated properly to new users.
Jun 21 2022, 12:31 PM · VyOS 1.3 Equuleus ( 1.3.1)

Jun 20 2022

danhusan added a comment to T4466: intel i225-v nic does not detect link after boot.
Jun 20 2022, 3:15 PM · VyOS 1.3 Equuleus
danhusan added a comment to T4466: intel i225-v nic does not detect link after boot.

Wow, well done! You don't happen to have an ISO you could share?

Jun 20 2022, 1:29 PM · VyOS 1.3 Equuleus
danhusan added a comment to T4466: intel i225-v nic does not detect link after boot.

Did you then end up with a fully working nic, bridging included?

Jun 20 2022, 8:05 AM · VyOS 1.3 Equuleus

Jun 16 2022

danhusan created T4466: intel i225-v nic does not detect link after boot.
Jun 16 2022, 6:43 AM · VyOS 1.3 Equuleus

Feb 4 2022

danhusan awarded T4120: [VXLAN] add ability to set multiple unicast-remotes a Love token.
Feb 4 2022, 10:11 PM · VyOS 1.3 Equuleus ( 1.3.1), VyOS 1.4 Sagitta

Dec 21 2021

danhusan closed T3913: VRF traffic fails after upgrade from 1.3.0-RC6 to 1.3.0-EPA1/2 as Resolved.
Dec 21 2021, 5:02 PM · VyOS 1.3 Equuleus (1.3.0)
danhusan added a comment to T3913: VRF traffic fails after upgrade from 1.3.0-RC6 to 1.3.0-EPA1/2.

Confirmed working in 1.3.0 LTS.

Dec 21 2021, 5:01 PM · VyOS 1.3 Equuleus (1.3.0)

Dec 18 2021

danhusan added a comment to T3913: VRF traffic fails after upgrade from 1.3.0-RC6 to 1.3.0-EPA1/2.

Can also confirm that 1.3.0-epa3 is broken, so something must have changed between epa3 and 202112180443.

Dec 18 2021, 5:35 PM · VyOS 1.3 Equuleus (1.3.0)
danhusan added a comment to T3913: VRF traffic fails after upgrade from 1.3.0-RC6 to 1.3.0-EPA1/2.

Tried 1.3-beta-202112180443, seems to be working as it should now.

Dec 18 2021, 3:23 PM · VyOS 1.3 Equuleus (1.3.0)

Nov 8 2021

danhusan added a comment to T3913: VRF traffic fails after upgrade from 1.3.0-RC6 to 1.3.0-EPA1/2.

Tested against 1.3.0-EPA3, same problem.

Nov 8 2021, 5:46 PM · VyOS 1.3 Equuleus (1.3.0)

Oct 18 2021

danhusan created T3913: VRF traffic fails after upgrade from 1.3.0-RC6 to 1.3.0-EPA1/2.
Oct 18 2021, 6:48 PM · VyOS 1.3 Equuleus (1.3.0)

Apr 12 2021

danhusan added a comment to T3149: ospfv3 bfd configuration bug / typo. config applied to wrong interface name..

Thanks!

Apr 12 2021, 8:17 PM · VyOS 1.2 Crux (VyOS 1.2.8), Restricted Project
danhusan added a comment to T3469: Upgrading from 1.2.6-S1 to 1.2.7 changes order of NICs on second reboot.

sudo journalctl -b

Apr 12 2021, 4:08 PM · VyOS 1.2 Crux (VyOS 1.2.9)
danhusan updated the task description for T3469: Upgrading from 1.2.6-S1 to 1.2.7 changes order of NICs on second reboot.
Apr 12 2021, 3:28 PM · VyOS 1.2 Crux (VyOS 1.2.9)
danhusan updated the task description for T3469: Upgrading from 1.2.6-S1 to 1.2.7 changes order of NICs on second reboot.
Apr 12 2021, 3:24 PM · VyOS 1.2 Crux (VyOS 1.2.9)
danhusan updated the task description for T3469: Upgrading from 1.2.6-S1 to 1.2.7 changes order of NICs on second reboot.
Apr 12 2021, 3:23 PM · VyOS 1.2 Crux (VyOS 1.2.9)
danhusan added a comment to T3469: Upgrading from 1.2.6-S1 to 1.2.7 changes order of NICs on second reboot.

lspci -knn

Apr 12 2021, 3:22 PM · VyOS 1.2 Crux (VyOS 1.2.9)
danhusan created T3469: Upgrading from 1.2.6-S1 to 1.2.7 changes order of NICs on second reboot.
Apr 12 2021, 3:22 PM · VyOS 1.2 Crux (VyOS 1.2.9)
danhusan updated subscribers of T3149: ospfv3 bfd configuration bug / typo. config applied to wrong interface name..

@c-po I expected this to go into 1.2.7 but it did not. How would I tag this properly so it hopefully makes it into 1.2.8?

Apr 12 2021, 8:11 AM · VyOS 1.2 Crux (VyOS 1.2.8), Restricted Project

Apr 9 2021

danhusan closed T3149: ospfv3 bfd configuration bug / typo. config applied to wrong interface name. as Resolved.
Apr 9 2021, 8:46 PM · VyOS 1.2 Crux (VyOS 1.2.8), Restricted Project

Dec 26 2020

danhusan added a comment to T3155: ospfv3 mtu-ignore not working on ethernet vifs.

https://github.com/vyos/vyatta-cfg-quagga/pull/60

Dec 26 2020, 11:03 PM · VyOS 1.2 Crux
danhusan created T3155: ospfv3 mtu-ignore not working on ethernet vifs.
Dec 26 2020, 11:02 PM · VyOS 1.2 Crux

Dec 25 2020

danhusan added a comment to T3149: ospfv3 bfd configuration bug / typo. config applied to wrong interface name..

https://github.com/vyos/vyatta-cfg-quagga/pull/59

Dec 25 2020, 3:39 PM · VyOS 1.2 Crux (VyOS 1.2.8), Restricted Project
danhusan added a comment to T3149: ospfv3 bfd configuration bug / typo. config applied to wrong interface name..
Dec 25 2020, 12:32 PM · VyOS 1.2 Crux (VyOS 1.2.8), Restricted Project

Dec 23 2020

danhusan renamed T3149: ospfv3 bfd configuration bug / typo. config applied to wrong interface name. from ospfv3 bdf configuration bug / typo to ospfv3 bfd configuration bug / typo. config applied to wrong interface name..
Dec 23 2020, 10:05 PM · VyOS 1.2 Crux (VyOS 1.2.8), Restricted Project
danhusan created T3149: ospfv3 bfd configuration bug / typo. config applied to wrong interface name..
Dec 23 2020, 9:48 PM · VyOS 1.2 Crux (VyOS 1.2.8), Restricted Project

Oct 15 2020

danhusan added a comment to T2979: BGP route leak at system boot.

This has come up multiple times before, see https://phabricator.vyos.net/T1698 for the solution.

Oct 15 2020, 12:14 PM · VyOS 1.2 Crux

May 28 2020

danhusan added a comment to T2523: Upgrade from 1.2.5 to 1.3-rolling-202005261512 results in broken network config on second boot.

Reworking my config so that it uses eth0->eth3 instead of eth1->eth4 makes everything work as expected. So something has clearly changed regarding the interface naming/creation logic.

May 28 2020, 9:27 AM · VyOS 1.3 Equuleus (1.3.3)

May 27 2020

danhusan added a comment to T2523: Upgrade from 1.2.5 to 1.3-rolling-202005261512 results in broken network config on second boot.

VyOS added those during the 2nd boot after upgrade. I would assume bug related to the fact that my config doesn't include eth0.

May 27 2020, 10:07 AM · VyOS 1.3 Equuleus (1.3.3)
danhusan added a comment to T2523: Upgrade from 1.2.5 to 1.3-rolling-202005261512 results in broken network config on second boot.
In T2523#65310, @c-po wrote:

Why is there no eth0 on VyOS 1.2.5?

May 27 2020, 6:07 AM · VyOS 1.3 Equuleus (1.3.3)

May 26 2020

danhusan created T2523: Upgrade from 1.2.5 to 1.3-rolling-202005261512 results in broken network config on second boot.
May 26 2020, 7:04 PM · VyOS 1.3 Equuleus (1.3.3)

Sep 23 2019

danhusan added a comment to T1219: Redundant active-active configuration, asymmetric routing and conntrack-sync cache.

Bump

Sep 23 2019, 7:58 PM · VyOS 1.2 Crux (VyOS 1.2.6), vyatta-conntrack-sync

May 14 2019

danhusan updated subscribers of T1219: Redundant active-active configuration, asymmetric routing and conntrack-sync cache.

@syncer Any chance of getting this merged into 1.2.2?

May 14 2019, 2:45 PM · VyOS 1.2 Crux (VyOS 1.2.6), vyatta-conntrack-sync

Apr 23 2019

danhusan added a comment to T1219: Redundant active-active configuration, asymmetric routing and conntrack-sync cache.

Any chance of getting this merged into 1.2.2?

Apr 23 2019, 3:30 PM · VyOS 1.2 Crux (VyOS 1.2.6), vyatta-conntrack-sync

Feb 23 2019

danhusan added a comment to T1148: epa2 BGP peers initiate before config is fully loaded, routes leak..

@danhusan IPv6 should not be affected. Workaround for IPv4:

Feb 23 2019, 11:20 PM · VyOS 1.3 Equuleus (1.3.0-epa1)

Feb 8 2019

danhusan added a comment to T1148: epa2 BGP peers initiate before config is fully loaded, routes leak..

Small config, just 4 interfaces with IPv4 and IPv6 + some BGP config. I am running the VyOS instance in ESXi with some fairly modern hardware.
Unfortunately I cannot just reboot this device at will. If you provide your email I can send over the config.

Feb 8 2019, 6:23 AM · VyOS 1.3 Equuleus (1.3.0-epa1)

Jan 28 2019

danhusan added a comment to T1160: snmp settings allowing access via IPv6 when it should not.
In T1160#31671, @c-po wrote:

But what should be the desired behavior?

  • When no network or client is speciefied we allow allo but as soon as one network/client is specified we limit it down?
Jan 28 2019, 8:45 AM · VyOS 1.2 Crux (VyOS 1.2.1)

Jan 27 2019

danhusan assigned T1160: snmp settings allowing access via IPv6 when it should not to syncer.
Jan 27 2019, 9:02 PM · VyOS 1.2 Crux (VyOS 1.2.1)

Jan 11 2019

danhusan added a comment to T1170: Frr Bgp DOS.

No need to disable VNC :-) The FRR package should be fixed already so just need to make sure it is in EPA3.

Jan 11 2019, 6:01 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a comment to T1170: Frr Bgp DOS.

That seems odd, my global peerings all reset at the time of the test. @mariusno and @rherold did you experience something similar?

Jan 11 2019, 3:46 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a comment to T1170: Frr Bgp DOS.
The FRR devs have released binary packages including the fix and
announced it on the FRR mailing lists.  After considering the feedback
on the list and discussing with FRR devs, we will postpone the
experiments until Jan. 23rd, and have updated the schedule to reflect
the delayed start and shorter timeline [A].  We will follow up with
FRR devs and mailing lists/users.
Jan 11 2019, 2:55 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)

Jan 8 2019

danhusan added a comment to T1170: Frr Bgp DOS.
We plan to resume the experiments January 16th (next Wednesday), and
have updated the experiment schedule [A] accordingly.  As always, we
welcome your feedback.
Jan 8 2019, 7:58 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a comment to T1170: Frr Bgp DOS.

Wow, this explains why all my sessions dropped yesterday.

Jan 8 2019, 7:54 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)

Jan 5 2019

danhusan created T1160: snmp settings allowing access via IPv6 when it should not.
Jan 5 2019, 11:19 PM · VyOS 1.2 Crux (VyOS 1.2.1)

Jan 4 2019

danhusan added a comment to T1153: VyOS 1.2.0RC10, RAID-1, fresh install, unable to save config.

RC11 is getting old, please retry with latest rolling: https://downloads.vyos.io/rolling/current/amd64/vyos-1.2.0-rolling%2B201901040337-amd64.iso

Jan 4 2019, 12:37 PM · VyOS 1.3 Equuleus (1.3.0-epa1), test

Jan 2 2019

danhusan added a comment to T1148: epa2 BGP peers initiate before config is fully loaded, routes leak..

IPv6 seems to have the same issue. Peer shutdown in configuration, reboot, results below:

Jan 2 2019, 7:10 PM · VyOS 1.3 Equuleus (1.3.0-epa1)
danhusan created T1148: epa2 BGP peers initiate before config is fully loaded, routes leak..
Jan 2 2019, 5:00 PM · VyOS 1.3 Equuleus (1.3.0-epa1)
danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

@c-po https://github.com/vyos/vyos-build/pull/35 is also needed. Without it upgrades (install image ...) will fail.

Jan 2 2019, 4:35 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

Added new pull requests, built and tested, working fine.

Jan 2 2019, 12:58 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)

Dec 31 2018

danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.
In T1120#29573, @c-po wrote:

instead of differentiating between raid and non raid installations - why not always wait 5 seconds for the discs to settle? As this is only done once on startup this is IMHO better then a special case.

Dec 31 2018, 2:06 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

https://github.com/vyos/vyatta-cfg-system/pull/97

Dec 31 2018, 10:58 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)

Dec 28 2018

danhusan added a comment to T1131: open-vm-tools causing 100% CPU load.

And FYI max-ipv6-routes=10 and max-ipv4-routes=10 doesn't seem to help either.

Dec 28 2018, 7:27 PM · VyOS 1.2 Crux (VyOS 1.2.2)
danhusan added a comment to T1131: open-vm-tools causing 100% CPU load.

Hi @danhusan, did you ever try another poll value, like 3 secs or 5 or anything like that? If set to 0, the host system won't show you any updated meta data, like if you change the ip address etc.
(https://github.com/vmware/open-vm-tools/blob/master/open-vm-tools/services/plugins/guestInfo/guestInfoServer.c#L1662)
I'm therefore not entirely sure if that should be treated as a special case scenario (we could publish a kb if you run into that condition), or if it is a general issue since you 2 were the only ones experience that issue as far as I know.
I'm also not sure it only is triggered by your situation (full bgp table) or if it can happen on other occasions as well, if you came across more issues regarding that value, please let me know.

Dec 28 2018, 7:19 PM · VyOS 1.2 Crux (VyOS 1.2.2)

Dec 22 2018

danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

PR https://github.com/vyos/vyatta-cfg-system/pull/96
Thanks @kroy

Dec 22 2018, 6:07 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)

Dec 20 2018

danhusan added a comment to T1131: open-vm-tools causing 100% CPU load.

It is vmware-tools collecting all the routes from VyOS and reporting them to the hypervisor so you can see them in the ESXi GUI. Not really optimal for full tables.

Dec 20 2018, 11:17 PM · VyOS 1.2 Crux (VyOS 1.2.2)
danhusan added a comment to T1131: open-vm-tools causing 100% CPU load.

Do you have a full bgp table on this box?

Dec 20 2018, 10:57 PM · VyOS 1.2 Crux (VyOS 1.2.2)
danhusan added a comment to T1131: open-vm-tools causing 100% CPU load.

IIRC I worked around this by editing /etc/vmware-tools/tools.conf and adding:

Dec 20 2018, 10:41 PM · VyOS 1.2 Crux (VyOS 1.2.2)
danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

And FYI, just to make sure that something wasn't triggered by hanging out in GRUB.
rootdelay=0 fails
rootdelay=2 works, so just a small pause is needed on my system at least.

Dec 20 2018, 9:43 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

@kroy you are clearly on a roll today, rootdelay=10 also did the trick.

Dec 20 2018, 9:33 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

Spot on, booting with acpi=off makes it come up properly and configurations are actually saved.
Still getting some errors but not sure if they matter or not:

2018-12-20 18.27.07.jpg (2×3 px, 3 MB)

Dec 20 2018, 5:28 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

Some data I wasn't able to find in any log files:

2018-12-20 18.01.57.jpg (2×3 px, 3 MB)

Dec 20 2018, 5:02 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

https://forum.vyos.io/t/vyos-1-2-0rc10-raid-1-fresh-install-unable-to-save-config/3059
These users might have the same issue. I noticed one of the symptoms of having the system is in this state is that the config is lost between reboots.

Dec 20 2018, 2:49 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

I am not able to reproduce it in vmware workstation.

Dec 20 2018, 2:47 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

I can let it sit forever, the status wont change as the array is missing one disk. Notice how after (auto read only) raid1 is only says sdb1[0] (sda1 is missing).
Also we can see that this wont fix itself from looking at the df -h output where the system clearly has booted straight from sda1 instead of from the raid array (/dev/md127)

Dec 20 2018, 11:25 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)

Dec 19 2018

danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

After reboot, running from local disks:

Dec 19 2018, 10:37 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a comment to T1120: rc11 raid-1 array wont come up on boot.

During install (booted from ISO):

Dec 19 2018, 10:34 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan added a project to T1120: rc11 raid-1 array wont come up on boot: VyOS 1.2 Crux ( VyOS 1.2.0-rc11).
Dec 19 2018, 10:26 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
danhusan created T1120: rc11 raid-1 array wont come up on boot in the S1 VyOS Public space.
Dec 19 2018, 10:26 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)

Nov 9 2018

danhusan added a comment to T982: received-routes returns "Inbound soft reconfiguration not enabled" despite being enabled.
From 739d0815786aa642292335e47d14d99a34f0e68d Mon Sep 17 00:00:00 2001
From: Daniel Husand <[email protected]>
Date: Fri, 9 Nov 2018 15:03:58 +0100
Subject: [PATCH] T982: soft-reconfiguration inbound now enables correctly on
 ipv4 peers
Nov 9 2018, 2:10 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc7)

Nov 6 2018

danhusan added a comment to T968: IPv4 BGP prefix lists not applying correctly.
From a70d2041bde216389b903eb273d3a09270d8f9aa Mon Sep 17 00:00:00 2001
From: Daniel Husand <[email protected]>
Date: Tue, 6 Nov 2018 15:11:05 +0100
Subject: [PATCH] Fixed some typos to get ipv4 prefix-lists working again. Bug
 T968.
Nov 6 2018, 2:19 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc7)

Nov 5 2018

danhusan added a comment to T968: IPv4 BGP prefix lists not applying correctly.

My test env has been running for 50 minutes without the prefix-lists engaging so I'd say this is another issue. Furthermore I think the issue you are describing has been fixed in the upcoming rc6 (T944).

Nov 5 2018, 4:11 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc7)
danhusan updated the task description for T968: IPv4 BGP prefix lists not applying correctly.
Nov 5 2018, 3:51 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc7)
danhusan updated the task description for T968: IPv4 BGP prefix lists not applying correctly.
Nov 5 2018, 3:51 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc7)
danhusan created T968: IPv4 BGP prefix lists not applying correctly.
Nov 5 2018, 3:51 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc7)

Oct 26 2018

danhusan added a comment to T939: Remove possibility to specify DHCP relay port.

Didn't know it existed, yes you are right. Thanks!

Oct 26 2018, 12:32 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc6)