I can't test this at this time. I stopped using the platform
- Queries
- All Stories
- Search
- Advanced Search
- Transactions
- Transaction Logs
Feed Advanced Search
Advanced Search
Advanced Search
Jul 12 2023
Jul 12 2023
Sep 30 2022
Sep 30 2022
I installed the latest release and its not working for me. Whenever I boot I lose eth0 and eth2 interfaces.
I end up with an eth1 (previously eth2) interface and startup errors that seem to indicate that migrate failed.
I would reconfigure everything to help test this, but I do need two network interfaces.
Sep 27 2022
Sep 27 2022
vyos@vyos:~$ show configuration
firewall {
interface eth2 { in { name OUTSIDE-IN } local { name OUTSIDE-LOCAL } } name OUTSIDE-IN { default-action drop rule 10 { action accept state { established enable related enable } } rule 20 { action accept destination { address 172.16.135.35 port 8123 } protocol tcp source { } state { new enable } } rule 21 { action accept destination { address 172.16.135.35 port 443 } protocol tcp state { new enable } } rule 30 { action accept destination { address 172.16.136.16 port 22 } protocol tcp source { address 13.90.97.251 } state { new enable } } rule 40 { action accept destination { address 172.16.136.96 port 1935,3478,3479,3480 } protocol tcp state { new enable } } rule 41 { action accept destination { address 172.16.136.96 port 3074,3478,3479 } protocol udp state { new enable } } } name OUTSIDE-LOCAL { default-action drop rule 10 { action accept state { established enable related enable } } rule 20 { action accept icmp { type-name echo-request } protocol icmp state { new enable } } rule 30 { action drop destination { port 22 } protocol tcp recent { count 4 time minute } state { new enable } } rule 31 { action accept destination { port 22 } protocol tcp state { new enable } } rule 40 { action accept destination { address 172.16.136.35 port 8123 } protocol tcp state { new enable } } }
}
interfaces {
ethernet eth0 { address 172.16.136.1/24 description INSIDE hw-id 6c:4b:90:52:32:75 } ethernet eth2 { address dhcp description OUTSIDE hw-id 7c:c2:c6:42:43:e1 } loopback lo { } wireless wlan0 { hw-id 50:5b:c2:ca:e1:03 physical-device phy0 }
}
nat {
destination { rule 10 { description "Port Forward: SSH to 172.16.136.16" destination { port 22 } inbound-interface eth2 protocol tcp source { address 13.90.97.251 } translation { address 172.16.136.16 } } rule 100 { description "HomeAssistant WAN" destination { port 8123 } inbound-interface eth2 protocol tcp translation { address 172.16.136.35 } } rule 110 { description "HomeAssistant Reflection To" destination { port 8123 } inbound-interface eth0 protocol tcp translation { address 172.16.136.35 } } rule 120 { description "Playstation - 172.16.136.96" destination { port 1935,3074,3478,3479,3480 } inbound-interface eth2 protocol tcp translation { address 172.16.136.96 } } } source { rule 100 { outbound-interface eth2 source { address 172.16.136.0/24 } translation { address masquerade } } rule 110 { description "HomeAssistant Reflection From" destination { address 172.16.136.0/24 } outbound-interface eth0 protocol tcp source { address 172.16.136.0/24 } translation { address masquerade } } }
}
service {
dhcp-server { shared-network-name LAN { domain-search drutherford.com subnet 172.16.136.0/24 { default-router 172.16.136.1 domain-name drutherford.com lease 86400 name-server 8.8.8.8 name-server 1.1.1.1 name-server 9.9.9.9 range 0 { start 172.16.136.50 stop 172.16.136.90 } static-mapping Backyard-Camera-Wireless { ip-address 172.16.136.101 mac-address 78:66:9D:7F:D7:73 } static-mapping Garage-Camera-Wireless { ip-address 172.16.136.99 mac-address 5C:C3:36:4C:D3:20 } static-mapping Green { ip-address 172.16.136.16 mac-address DC:A6:32:6D:20:54 } static-mapping HomeAssistant { ip-address 172.16.136.35 mac-address B8:27:EB:81:ED:01 } static-mapping Playstation4 { ip-address 172.16.136.96 mac-address 00:D9:D1:FD:E3:C8 } static-mapping Pool-Camera-Wireless { ip-address 172.16.136.100 mac-address 78:66:9D:5B:F8:9C } static-mapping RasPBX { ip-address 172.16.136.102 mac-address B8:27:EB:BA:9C:BD } static-mapping Roku-3 { ip-address 172.16.136.98 mac-address B8:3E:59:B3:DF:DB } static-mapping Roku-Ultra { ip-address 172.16.136.97 mac-address 88:DE:A9:C1:C0:41 } static-mapping client1 { ip-address 172.16.136.102 mac-address B8:27:EB:BA:9C:BD } } } } ssh { port 22 }
}
system {
config-management { commit-revisions 100 } conntrack { modules { ftp h323 nfs pptp sip sqlnet tftp } } console { device ttyS0 { speed 115200 } } host-name vyos login { user vyos { authentication { encrypted-password **************** } } } ntp { server time1.vyos.net { } server time2.vyos.net { } server time3.vyos.net { } } syslog { global { facility all { level info } facility protocols { level debug } } }
}
still no good
vyos@vyos:~$ show nat destination rules
Traceback (most recent call last):
File "/usr/libexec/vyos/op_mode/nat.py", line 302, in <module> res = vyos.opmode.run(sys.modules[__name__]) File "/usr/lib/python3/dist-packages/vyos/opmode.py", line 147, in run res = func(**args) File "/usr/libexec/vyos/op_mode/nat.py", line 280, in show_rules return _get_formatted_output_rules(nat_rules, direction, family) File "/usr/libexec/vyos/op_mode/nat.py", line 112, in _get_formatted_output_rules if 'prefix' in match['right'] or 'set' in match['right']:
TypeError: argument of type 'int' is not iterable
vyos@vyos:~$ show version
Version: VyOS 1.4-rolling-202209260217
Release train: sagitta