Page MenuHomeVyOS Platform
Feed All Stories

Fri, Nov 19

c-po renamed T3318: Update Linux Kernel to v5.4.163 / 5.10.83 from Update Linux Kernel to v5.4.155 / 5.10.75 to Update Linux Kernel to v5.4.160 / 5.10.80.
Fri, Nov 19, 6:15 AM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
anthr76 added a comment to T3979: vyos-hostd unable to hostfile-update.

I wish I understood this subsystem better as I'd love to get it fixed. I'm going to take a closer look tomorrow

Fri, Nov 19, 2:40 AM · VyOS 1.4 Sagitta

Thu, Nov 18

jestabro added a comment to T4003: API for "show interfaces ethernet" does not include the interface description.

One detail towards a resolution: if the vyos-http-api-server is started manually (without systemd) then the output is not truncated. If one wants to try this, one should configure 'set service https api' (to update Nginx config appropriately); then 'systemctl stop vyos-http-api'; then, as root:

Thu, Nov 18, 9:16 PM · VyOS 1.3 Equuleus, VyOS 1.4 Sagitta
Viacheslav changed the status of T4010: DMVPN generates incorrect configuration life_time for swanctl.conf from Open to In progress.

PR https://github.com/vyos/vyos-1x/pull/1074

Thu, Nov 18, 8:14 PM · VyOS 1.4 Sagitta
c-po added a comment to T4010: DMVPN generates incorrect configuration life_time for swanctl.conf.

Shows which options moved to the new name in swanctl

Thu, Nov 18, 7:54 PM · VyOS 1.4 Sagitta
Viacheslav updated the task description for T4010: DMVPN generates incorrect configuration life_time for swanctl.conf.
Thu, Nov 18, 7:29 PM · VyOS 1.4 Sagitta
Viacheslav changed the status of T4006: Add additional Linux capabilities to container configuration from Open to Needs testing.
Thu, Nov 18, 7:18 PM · VyOS 1.4 Sagitta
Viacheslav created T4010: DMVPN generates incorrect configuration life_time for swanctl.conf.
Thu, Nov 18, 7:01 PM · VyOS 1.4 Sagitta
c-po closed T3510: RADIUS usersname is not shown on CLI as Resolved.
Thu, Nov 18, 6:55 PM · VyOS 1.4 Sagitta
c-po added a comment to T3510: RADIUS usersname is not shown on CLI.

Re-tested working on

Thu, Nov 18, 6:55 PM · VyOS 1.4 Sagitta
Viacheslav closed T4009: DMVPN generates incorrect configuration with hyphens for swanctl.conf as Invalid.
Thu, Nov 18, 6:32 PM · VyOS 1.4 Sagitta
Viacheslav created T4009: DMVPN generates incorrect configuration with hyphens for swanctl.conf.
Thu, Nov 18, 6:28 PM · VyOS 1.4 Sagitta
c-po moved T3795: WWAN: issues with non connected interface / no signal from Backlog to Finished on the VyOS 1.3 Equuleus (1.3.0) board.
Thu, Nov 18, 6:14 PM · VyOS 1.4 Sagitta, VyOS 1.3 Equuleus (1.3.0)
c-po moved T4008: dhcp: change client retry interval form 300 -> 60 seconds from Need Triage to Finished on the VyOS 1.3 Equuleus (1.3.0) board.
Thu, Nov 18, 6:14 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po moved T3962: Image cannot be built without open-vm-tools from Need Triage to Finished on the VyOS 1.3 Equuleus (1.3.0) board.
Thu, Nov 18, 6:14 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po moved T3795: WWAN: issues with non connected interface / no signal from Need Triage to Finished on the VyOS 1.4 Sagitta board.
Thu, Nov 18, 6:14 PM · VyOS 1.4 Sagitta, VyOS 1.3 Equuleus (1.3.0)
c-po moved T4008: dhcp: change client retry interval form 300 -> 60 seconds from Need Triage to Finished on the VyOS 1.4 Sagitta board.
Thu, Nov 18, 6:14 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po closed T3795: WWAN: issues with non connected interface / no signal as Resolved.
Thu, Nov 18, 6:13 PM · VyOS 1.4 Sagitta, VyOS 1.3 Equuleus (1.3.0)
c-po added a project to T3795: WWAN: issues with non connected interface / no signal: VyOS 1.4 Sagitta.
Thu, Nov 18, 5:02 PM · VyOS 1.4 Sagitta, VyOS 1.3 Equuleus (1.3.0)
c-po closed T3680: Static routes with dhcp-interface are flaky as Resolved.
Thu, Nov 18, 5:02 PM · VyOS 1.4 Sagitta
c-po closed T4008: dhcp: change client retry interval form 300 -> 60 seconds as Resolved.
Thu, Nov 18, 4:55 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po created T4008: dhcp: change client retry interval form 300 -> 60 seconds.
Thu, Nov 18, 4:55 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po closed T3995: OpenVPN: do not stop/start service on configuration change as Resolved.
Thu, Nov 18, 4:54 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po moved T3995: OpenVPN: do not stop/start service on configuration change from Backlog to Finished on the VyOS 1.3 Equuleus (1.3.0) board.
Thu, Nov 18, 4:54 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
Viacheslav created T4007: Ability to use x509 certificates for DMVPN.
Thu, Nov 18, 4:37 PM · VyOS 1.4 Sagitta
jestabro changed the status of T4003: API for "show interfaces ethernet" does not include the interface description from Open to Confirmed.

Thanks, I've confirmed the issue; I should have it resolved soon

Thu, Nov 18, 4:12 PM · VyOS 1.3 Equuleus, VyOS 1.4 Sagitta
tlcarpenter added a comment to T4003: API for "show interfaces ethernet" does not include the interface description.

I notice my example of the API only focused on one interface (eth0), where the CLI (and the title showed all interfaces). Doesn't change the fact that in either case the API doesn't return data for the description.

Thu, Nov 18, 4:03 PM · VyOS 1.3 Equuleus, VyOS 1.4 Sagitta
erkin changed the status of T1083: Implement persistent/random address and port mapping options for NAT rules, a subtask of T3710: Upgrade the kernel in 1.3 to 5.10, from Needs testing to In progress.
Thu, Nov 18, 2:05 PM · VyOS 1.3 Equuleus (1.3.0-epa1)
erkin changed the status of T1083: Implement persistent/random address and port mapping options for NAT rules, a subtask of T2198: Rewrite NAT in new XML/Python style, from Needs testing to In progress.
Thu, Nov 18, 2:05 PM · VyOS 1.3 Equuleus
erkin changed the status of T1083: Implement persistent/random address and port mapping options for NAT rules from Needs testing to In progress.
Thu, Nov 18, 2:05 PM · VyOS 1.2 Crux (VyOS 1.2.9), VyOS 1.3 Equuleus (1.3.0), test, VyOS 1.4 Sagitta
anthr76 updated the task description for T4006: Add additional Linux capabilities to container configuration.
Thu, Nov 18, 1:55 PM · VyOS 1.4 Sagitta
anthr76 created T4006: Add additional Linux capabilities to container configuration.
Thu, Nov 18, 1:30 PM · VyOS 1.4 Sagitta
SrividyaA claimed T3998: route-target completion incorrect description.
Thu, Nov 18, 11:00 AM · VyOS 1.4 Sagitta
Viacheslav added a comment to T4004: IPsec ike-group parameters are not saved correctly (after reboot).

I don't think that it is a bug.
If you don't set any value, it gets default value ikev1
https://github.com/vyos/vyatta-cfg-vpn/blob/d2d4361bffaa0b99c85c7fbf46ddd760ae6512f0/templates/vpn/ipsec/ike-group/node.tag/key-exchange/node.def#L3

Thu, Nov 18, 8:12 AM · VyOS 1.3 Equuleus (1.3.0-epa3)
NikolayP created T4005: Feature Request: IPsec IKEv1 + IKEv2 for one peer.
Thu, Nov 18, 4:30 AM · VyOS 1.3 Equuleus (1.3.0-epa3)
NikolayP created T4004: IPsec ike-group parameters are not saved correctly (after reboot).
Thu, Nov 18, 3:53 AM · VyOS 1.3 Equuleus (1.3.0-epa3)

Wed, Nov 17

c-po moved T3996: SNMP service error in log from Need Triage to Finished on the VyOS 1.4 Sagitta board.
Wed, Nov 17, 8:54 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po moved T3997: Add CAP_NET_RAW capability from Need Triage to Finished on the VyOS 1.4 Sagitta board.
Wed, Nov 17, 8:54 PM · VyOS 1.4 Sagitta
c-po moved T3996: SNMP service error in log from Need Triage to Finished on the VyOS 1.3 Equuleus (1.3.0) board.
Wed, Nov 17, 8:53 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po closed T3996: SNMP service error in log as Resolved.
Wed, Nov 17, 8:53 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
dmbaturin renamed T1083: Implement persistent/random address and port mapping options for NAT rules from Implement "--persistent" option to NAT rules to Implement persistent/random address and port mapping options for NAT rules.
Wed, Nov 17, 8:10 PM · VyOS 1.2 Crux (VyOS 1.2.9), VyOS 1.3 Equuleus (1.3.0), test, VyOS 1.4 Sagitta
dmbaturin added a comment to T1083: Implement persistent/random address and port mapping options for NAT rules.

Since we had to revert to the old NAT implementation due to kernel issues, this had to be back-back-ported to the old Perl code as well.

Wed, Nov 17, 8:09 PM · VyOS 1.2 Crux (VyOS 1.2.9), VyOS 1.3 Equuleus (1.3.0), test, VyOS 1.4 Sagitta
dmbaturin reopened T1083: Implement persistent/random address and port mapping options for NAT rules, a subtask of T3710: Upgrade the kernel in 1.3 to 5.10, as Needs testing.
Wed, Nov 17, 8:05 PM · VyOS 1.3 Equuleus (1.3.0-epa1)
dmbaturin reopened T1083: Implement persistent/random address and port mapping options for NAT rules, a subtask of T2198: Rewrite NAT in new XML/Python style, as Needs testing.
Wed, Nov 17, 8:05 PM · VyOS 1.3 Equuleus
dmbaturin reopened T1083: Implement persistent/random address and port mapping options for NAT rules as "Needs testing".
Wed, Nov 17, 8:05 PM · VyOS 1.2 Crux (VyOS 1.2.9), VyOS 1.3 Equuleus (1.3.0), test, VyOS 1.4 Sagitta
c-po closed T3350: OpenVPN config file generation broken as Resolved.
Wed, Nov 17, 7:42 PM · VyOS 1.4 Sagitta, VyOS 1.3 Equuleus (1.3.0)
c-po moved T3350: OpenVPN config file generation broken from Need Triage to Finished on the VyOS 1.4 Sagitta board.
Wed, Nov 17, 7:42 PM · VyOS 1.4 Sagitta, VyOS 1.3 Equuleus (1.3.0)
c-po moved T3350: OpenVPN config file generation broken from Need Triage to Finished on the VyOS 1.3 Equuleus (1.3.0) board.
Wed, Nov 17, 7:42 PM · VyOS 1.4 Sagitta, VyOS 1.3 Equuleus (1.3.0)
jestabro claimed T4003: API for "show interfaces ethernet" does not include the interface description.
Wed, Nov 17, 4:04 PM · VyOS 1.3 Equuleus, VyOS 1.4 Sagitta
tlcarpenter created T4003: API for "show interfaces ethernet" does not include the interface description.
Wed, Nov 17, 3:35 PM · VyOS 1.3 Equuleus, VyOS 1.4 Sagitta
NikolayP created T4002: firewall group network-group long names restriction incorrect behavior.
Wed, Nov 17, 12:45 PM · VyOS 1.3 Equuleus (1.3.0-epa3)
NikolayP created T4001: Feature Request: IPsec transport mode. VyOS can not use local-subnet or remote-subnet when using transport mode.
Wed, Nov 17, 11:39 AM · VyOS 1.3 Equuleus (1.3.0-epa3)

Tue, Nov 16

Viacheslav created T4000: containers storage doesn't cleanup.
Tue, Nov 16, 9:52 PM · VyOS 1.4 Sagitta
c-po changed the status of T3996: SNMP service error in log from Open to Confirmed.
Tue, Nov 16, 6:12 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
daniil added a comment to T3999: show lldp neighbor Traceback error.
{
  "lldp": {
    "interface": [
      {
        "eth0": {
          "via": "LLDP",
          "rid": "5",
          "age": "0 day, 00:00:16",
          "chassis": {
            "id": {
              "type": "mac",
              "value": "3c:61:04:5b:68:c0"
            },
            "descr": "Juniper Networks, Inc. ex2200-c-12t-2g , version 11.4R7.5 Build date: 2013-03-01 09:18:42 UTC ",
            "capability": [
              {
                "type": "Bridge",
                "enabled": true
              },
              {
                "type": "Router",
                "enabled": true
              }
            ]
          },
          "port": {
            "id": {
              "type": "local",
              "value": "521"
            },
            "descr": "ge-0/0/9.0",
            "ttl": "120"
          },
          "unknown-tlvs": {
            "unknown-tlv": {
              "oui": "00,90,69",
              "subtype": "1",
              "len": "12",
              "value": "47,50,30,32,31,33,33,36,30,36,39,36"
            }
          }
        }
      }
    ]
  }
}
Tue, Nov 16, 3:32 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
Viacheslav added a comment to T3999: show lldp neighbor Traceback error.

@daniil Can you provide the output of json format?

Tue, Nov 16, 3:30 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
unity added a comment to T3946: Automatically resize the root partition if the drive has extra space.

New PR was created https://github.com/vyos/vyos-1x/pull/1072

Tue, Nov 16, 3:08 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
Viacheslav added a project to T3999: show lldp neighbor Traceback error: VyOS 1.4 Sagitta.
Tue, Nov 16, 2:44 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
daniil created T3999: show lldp neighbor Traceback error.
Tue, Nov 16, 2:42 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
e.khudiyev created T3998: route-target completion incorrect description.
Tue, Nov 16, 2:28 PM · VyOS 1.4 Sagitta
bjw-s closed T3997: Add CAP_NET_RAW capability, a subtask of T3676: Container option to add Linux capabilities, as Invalid.
Tue, Nov 16, 12:58 PM · VyOS 1.4 Sagitta
bjw-s closed T3997: Add CAP_NET_RAW capability as Invalid.
Tue, Nov 16, 12:58 PM · VyOS 1.4 Sagitta
bjw-s added a comment to T3997: Add CAP_NET_RAW capability.

Nevermind, this was added through T3997.

Tue, Nov 16, 12:57 PM · VyOS 1.4 Sagitta
bjw-s updated the task description for T3997: Add CAP_NET_RAW capability.
Tue, Nov 16, 10:26 AM · VyOS 1.4 Sagitta
bjw-s created T3997: Add CAP_NET_RAW capability.
Tue, Nov 16, 10:25 AM · VyOS 1.4 Sagitta
hexes added a comment to T3996: SNMP service error in log.

When i remove from /etc/snmp/snmpd.conf ,('::1', '161') in agentaddress it solve the issue....

Tue, Nov 16, 9:37 AM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
hexes added a comment to T3996: SNMP service error in log.
show system ipv6 
 disable
Tue, Nov 16, 9:32 AM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
hexes added a comment to T3996: SNMP service error in log.
show service snmp 
 community public {
     authorization ro
     network 11.11.11.0/24
 }
 contact gg@g.com
 listen-address 11.11.11.251 {
     port 161
 }
 location ru-brn
Tue, Nov 16, 9:29 AM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
hexes added a comment to T3996: SNMP service error in log.
Nov 16 16:23:27 r1-brn systemd[1]: snmpd.service: Main process exited, code=exited, status=1/FAILURE
Nov 16 16:23:27 r1-brn systemd[1]: snmpd.service: Failed with result 'exit-code'.
Tue, Nov 16, 9:24 AM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
hexes created T3996: SNMP service error in log.
Tue, Nov 16, 9:19 AM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po added a project to T2279: Router resolves as 127.0.1.1 when using Router's Recursive DNS: VyOS 1.4 Sagitta.
Tue, Nov 16, 6:53 AM · VyOS 1.4 Sagitta, VyOS 1.3 Equuleus (1.3.0)
fortinj1354 awarded T2279: Router resolves as 127.0.1.1 when using Router's Recursive DNS a Like token.
Tue, Nov 16, 6:24 AM · VyOS 1.4 Sagitta, VyOS 1.3 Equuleus (1.3.0)

Mon, Nov 15

c-po closed T3724: Allow setting host-name in l2tp section of accel-ppp as Resolved.
Mon, Nov 15, 8:26 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po moved T3995: OpenVPN: do not stop/start service on configuration change from Need Triage to Backlog on the VyOS 1.3 Equuleus (1.3.0) board.
Mon, Nov 15, 8:25 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po moved T3724: Allow setting host-name in l2tp section of accel-ppp from In Progress to Finished on the VyOS 1.3 Equuleus (1.3.0) board.
Mon, Nov 15, 8:25 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po moved T3869: Rewrite vyatta_net_name/vyatta_interface_rescan in Python from Backport Candidates to Finished on the VyOS 1.4 Sagitta board.
Mon, Nov 15, 8:24 PM · VyOS 1.4 Sagitta
c-po moved T3982: DHCP server commit fails if static-mapping contains + or . from Need Triage to Finished on the VyOS 1.4 Sagitta board.
Mon, Nov 15, 8:24 PM · VyOS 1.4 Sagitta, VyOS 1.3 Equuleus
c-po moved T3994: VRF: unable to delete vrf when name contains numbers, hyphen or underscore from Need Triage to Finished on the VyOS 1.4 Sagitta board.
Mon, Nov 15, 8:24 PM · VyOS 1.4 Sagitta
c-po moved T3995: OpenVPN: do not stop/start service on configuration change from Need Triage to Finished on the VyOS 1.4 Sagitta board.
Mon, Nov 15, 8:24 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
Viacheslav added a subtask for T3995: OpenVPN: do not stop/start service on configuration change: T2400: OpenVPN: dont restart server if no need.
Mon, Nov 15, 8:23 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
Viacheslav added a parent task for T2400: OpenVPN: dont restart server if no need: T3995: OpenVPN: do not stop/start service on configuration change.
Mon, Nov 15, 8:23 PM · VyOS 1.3 Equuleus (1.3.0)
c-po added a comment to T3995: OpenVPN: do not stop/start service on configuration change.
Nov 15 21:23:22 LR1 systemd[1]: Reloading OpenVPN connection to vtun1.
Nov 15 21:23:22 LR1 openvpn-vtun1[13941]: event_wait : Interrupted system call (code=4)
Nov 15 21:23:22 LR1 openvpn-vtun1[13941]: Closing TUN/TAP interface
Nov 15 21:23:22 LR1 openvpn-vtun1[13941]: net_addr_ptp_v4_del: 10.255.1.1 dev vtun1
Nov 15 21:23:22 LR1 systemd[1]: Reloaded OpenVPN connection to vtun1.
Nov 15 21:23:22 LR1 openvpn-vtun1[13941]: SIGHUP[hard,] received, process restarting
Nov 15 21:23:22 LR1 openvpn-vtun1[13941]: Cipher negotiation is disabled since neither P2MP client nor server mode is enabled
Nov 15 21:23:22 LR1 openvpn-vtun1[13941]: WARNING: file '/run/openvpn/vtun1_shared.key' is group or others accessible
Nov 15 21:23:22 LR1 openvpn-vtun1[13941]: OpenVPN 2.5.1 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on May 14 2021
Nov 15 21:23:22 LR1 openvpn-vtun1[13941]: library versions: OpenSSL 1.1.1k  25 Mar 2021, LZO 2.10
Nov 15 21:23:22 LR1 openvpn-vtun1[13941]: Restart pause, 5 second(s)
Mon, Nov 15, 8:23 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po added a project to T3350: OpenVPN config file generation broken: VyOS 1.4 Sagitta.
Mon, Nov 15, 8:08 PM · VyOS 1.4 Sagitta, VyOS 1.3 Equuleus (1.3.0)
c-po changed the status of T3995: OpenVPN: do not stop/start service on configuration change from Open to In progress.
Mon, Nov 15, 8:07 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po created T3995: OpenVPN: do not stop/start service on configuration change.
Mon, Nov 15, 8:07 PM · VyOS 1.3 Equuleus (1.3.0), VyOS 1.4 Sagitta
c-po closed T3960: FRR Misconfig when using multiple VRF VNI as Resolved.
Mon, Nov 15, 7:55 PM · VyOS 1.4 Sagitta
c-po closed T3994: VRF: unable to delete vrf when name contains numbers, hyphen or underscore as Resolved.
Mon, Nov 15, 7:55 PM · VyOS 1.4 Sagitta
c-po changed the status of T3994: VRF: unable to delete vrf when name contains numbers, hyphen or underscore from Open to In progress.
Mon, Nov 15, 7:29 PM · VyOS 1.4 Sagitta
c-po created T3994: VRF: unable to delete vrf when name contains numbers, hyphen or underscore.
Mon, Nov 15, 7:29 PM · VyOS 1.4 Sagitta
c-po triaged T3960: FRR Misconfig when using multiple VRF VNI as Normal priority.
Mon, Nov 15, 6:37 PM · VyOS 1.4 Sagitta
Viacheslav triaged T2081: Support Ethernet over IP (EoIP) as Wishlist priority.
Mon, Nov 15, 6:11 PM · VyOS 1.4 Sagitta
jestabro edited projects for T3993: Extend HTTP API GraphQL support, added: VyOS 1.3 Equuleus; removed VyOS 1.3 Equuleus (1.3.0).
Mon, Nov 15, 6:01 PM · VyOS 1.3 Equuleus, VyOS 1.4 Sagitta
jestabro added a subtask for T2768: Define a high level HTTP API: T3993: Extend HTTP API GraphQL support.
Mon, Nov 15, 5:51 PM · VyOS 1.3 Equuleus (1.3.0)
jestabro added a parent task for T3993: Extend HTTP API GraphQL support: T2768: Define a high level HTTP API.
Mon, Nov 15, 5:51 PM · VyOS 1.3 Equuleus, VyOS 1.4 Sagitta
jestabro triaged T3993: Extend HTTP API GraphQL support as Normal priority.
Mon, Nov 15, 5:50 PM · VyOS 1.3 Equuleus, VyOS 1.4 Sagitta
Viacheslav added a comment to T2081: Support Ethernet over IP (EoIP) .

By the way, mikrotik IPoE format doesn't compatible with VyOS

Mon, Nov 15, 5:49 PM · VyOS 1.4 Sagitta
Dmitry created T3992: Traceback on adding interface to bridge with configured ip address.
Mon, Nov 15, 3:26 PM · VyOS 1.4 Sagitta
Viacheslav added a comment to T3979: vyos-hostd unable to hostfile-update.

https://github.com/vyos/vyos-1x/blob/1353757247c027f6352000a9450b502c25c460c8/src/utils/vyos-hostsd-client#L123-L139
entry['address']] expect list

Mon, Nov 15, 3:12 PM · VyOS 1.4 Sagitta
Viacheslav reassigned T3960: FRR Misconfig when using multiple VRF VNI from m.korobeinikov to c-po.
Mon, Nov 15, 10:29 AM · VyOS 1.4 Sagitta
Dmitry created T3991: PKI operational command return traceback.
Mon, Nov 15, 10:21 AM · VyOS 1.4 Sagitta