Page MenuHomeVyOS Platform
Feed All Stories

Feb 21 2020

c-po moved T2059: Set source-validation on bond vif don't work from Need Triage to Finished on the VyOS 1.3 Equuleus board.
Feb 21 2020, 4:04 PM · VyOS 1.2 Crux (VyOS 1.2.5)
c-po added a project to T2059: Set source-validation on bond vif don't work: VyOS 1.2 Crux (VyOS 1.2.5).
Feb 21 2020, 4:04 PM · VyOS 1.2 Crux (VyOS 1.2.5)
c-po changed the status of T2059: Set source-validation on bond vif don't work from Open to Backport candidate.
Feb 21 2020, 4:03 PM · VyOS 1.2 Crux (VyOS 1.2.5)
olofl created T2061: protocol logs not sent to remote syslog.
Feb 21 2020, 10:36 AM · VyOS 1.2 Crux (VyOS 1.2.7)
rherold created T2060: source-validation will be configured at different locations and could lead to massive confusion.
Feb 21 2020, 9:37 AM · VyOS 1.3 Equuleus (1.3.6), VyOS-1.2.0-GA
rherold added a comment to T2058: RCE in pppd and ppp client.

https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-8597

Feb 21 2020, 8:24 AM · VyOS-1.2.0-GA
rherold renamed T2058: RCE in pppd and ppp client from Possible RCE in pppd and ppp client to RCE in pppd and ppp client.
Feb 21 2020, 8:24 AM · VyOS-1.2.0-GA

Feb 20 2020

jestabro changed the status of T2029: Switch to new syntax for config file component versions from Open to Needs testing.
Feb 20 2020, 8:33 PM · VyOS 1.3 Equuleus (1.3.0)
jestabro updated the task description for T2029: Switch to new syntax for config file component versions.
Feb 20 2020, 8:11 PM · VyOS 1.3 Equuleus (1.3.0)
rherold added a comment to T2059: Set source-validation on bond vif don't work.

I send a pull request to fix it:

Feb 20 2020, 7:49 PM · VyOS 1.2 Crux (VyOS 1.2.5)
rherold created T2059: Set source-validation on bond vif don't work.
Feb 20 2020, 7:33 PM · VyOS 1.2 Crux (VyOS 1.2.5)
rherold created T2058: RCE in pppd and ppp client.
Feb 20 2020, 6:18 PM · VyOS-1.2.0-GA
thomas-mangin added a comment to T2057: Generalised Interface configuration.

This work overtakes T2046, as it implements the same _create/_delete interface. If merged it would replace it.

Feb 20 2020, 5:17 PM · VyOS 1.3 Equuleus (1.3.0)
thomas-mangin created T2057: Generalised Interface configuration.
Feb 20 2020, 4:54 PM · VyOS 1.3 Equuleus (1.3.0)
dongjunbo updated the task description for T2056: Building images using vyos-build Docker container error .
Feb 20 2020, 3:49 PM · Rejected
dongjunbo updated the task description for T2056: Building images using vyos-build Docker container error .
Feb 20 2020, 3:47 PM · Rejected
dongjunbo triaged T2056: Building images using vyos-build Docker container error as High priority.
Feb 20 2020, 3:46 PM · Rejected
elbandi added a comment to T1538: Update conntrack-sync packages to fix VRRP issues.

It's an upstream bug as @xrobau said. vyos dev sould upgrade https://github.com/vyos/conntrack-tools repo, and apply this patch:
https://git.netfilter.org/conntrack-tools/commit/?id=c12fa8df76752b0a011430f069677b52e4dad164

Feb 20 2020, 1:56 PM · VyOS 1.3 Equuleus (1.3.0)
dongjunbo added a comment to T2036: Open Connect VPN Server () support.
In T2036#53376, @c-po wrote:

Hello @dongjunbo what are the benefits of ocserv over the other VPN Solutions already in place?

  • WireGuard
  • OpenVPN
  • L2TP/IPSec
  • PPTP
  • SSTP
  • IKEv2 road warrior (not yet implemented, only site2site)
Feb 20 2020, 1:38 PM · VyOS 1.3 Equuleus (1.3.0)
c-po changed the status of T2055: Remove IPv6 router-advert options for PPPoE from Open to In progress.
Feb 20 2020, 7:19 AM · VyOS 1.3 Equuleus (1.3.0)
c-po changed the status of T2055: Remove IPv6 router-advert options for PPPoE, a subtask of T1318: PPPoE client CLI redesign, from Open to In progress.
Feb 20 2020, 7:19 AM · VyOS 1.3 Equuleus (1.3.0)
c-po claimed T2055: Remove IPv6 router-advert options for PPPoE.
Feb 20 2020, 7:19 AM · VyOS 1.3 Equuleus (1.3.0)
c-po created T2055: Remove IPv6 router-advert options for PPPoE.
Feb 20 2020, 7:18 AM · VyOS 1.3 Equuleus (1.3.0)
c-po closed T1969: OSPF with WireGuard cause Route Inactive as Resolved.
Feb 20 2020, 7:15 AM · VyOS 1.3 Equuleus (1.3.0)
tjjh89017 added a comment to T1969: OSPF with WireGuard cause Route Inactive.

I tested vyos-1.3-rolling-202002200217-amd64.iso
It works now.
Thanks for help!

Feb 20 2020, 3:27 AM · VyOS 1.3 Equuleus (1.3.0)

Feb 19 2020

Unknown Object (User) added a comment to T2051: Throughput anomalies.

It would be useful if someone could do similar tests using GNS3 in a powerful computer.

Feb 19 2020, 10:22 PM · VyOS 1.3 Equuleus (1.3.5), VyOS 1.4 Sagitta
jestabro added a comment to T2053: Update vyos-load-config.py for version string syntax change.

This is dependent on T2029, PR 224, and should only be merged after that PR.

Feb 19 2020, 7:44 PM · VyOS 1.3 Equuleus (1.3.0)
jestabro added a comment to T2052: Update vyos-merge-config.py for version string syntax change.

This is dependent on T2029, PR 224, and should only be merged after that PR.

Feb 19 2020, 7:43 PM · VyOS 1.3 Equuleus (1.3.0)
c-po added a comment to T31: Add VRF support.

Auto completion should be done on a per CLI path:

Feb 19 2020, 7:37 PM · VyOS 1.3 Equuleus (1.3.0-epa1)
elbuit added a comment to T1838: Flow accounting for ppp interfaces not work.
In T1838#50692, @syncer wrote:

@Dmitry and i talked that it will be wise to move ipt-netflow for better performance

Feb 19 2020, 6:46 PM · VyOS 1.5 Circinus
jjakob triaged T2054: Changing "system name-server" doesn't update dns forwarding config, neither does "restart dns forwarding" as Normal priority.
Feb 19 2020, 6:37 PM · VyOS 1.3 Equuleus (1.3.0)
c-po changed the status of T1318: PPPoE client CLI redesign, a subtask of T1579: Rewrite all interface types in new XML/Python style, from Open to In progress.
Feb 19 2020, 5:13 PM · VyOS 1.3 Equuleus (1.3.0)
c-po changed the status of T1318: PPPoE client CLI redesign from Open to In progress.
Feb 19 2020, 5:13 PM · VyOS 1.3 Equuleus (1.3.0)
jestabro added a subtask for T2029: Switch to new syntax for config file component versions: T2053: Update vyos-load-config.py for version string syntax change.
Feb 19 2020, 4:54 PM · VyOS 1.3 Equuleus (1.3.0)
jestabro added a parent task for T2053: Update vyos-load-config.py for version string syntax change: T2029: Switch to new syntax for config file component versions.
Feb 19 2020, 4:54 PM · VyOS 1.3 Equuleus (1.3.0)
jestabro triaged T2053: Update vyos-load-config.py for version string syntax change as Normal priority.
Feb 19 2020, 4:53 PM · VyOS 1.3 Equuleus (1.3.0)
jestabro added a subtask for T2029: Switch to new syntax for config file component versions: T2052: Update vyos-merge-config.py for version string syntax change.
Feb 19 2020, 4:51 PM · VyOS 1.3 Equuleus (1.3.0)
jestabro added a parent task for T2052: Update vyos-merge-config.py for version string syntax change: T2029: Switch to new syntax for config file component versions.
Feb 19 2020, 4:51 PM · VyOS 1.3 Equuleus (1.3.0)
jestabro triaged T2052: Update vyos-merge-config.py for version string syntax change as Normal priority.
Feb 19 2020, 4:50 PM · VyOS 1.3 Equuleus (1.3.0)
jestabro added a comment to T2029: Switch to new syntax for config file component versions.

This PR changes the syntax of the trailing version string of the config file (cf. above), as represented during config migration, and the parsing by which configtree splits the config file into the config section proper and the version string.

Feb 19 2020, 3:55 PM · VyOS 1.3 Equuleus (1.3.0)
thomas-mangin added a comment to T31: Add VRF support.

We could indeed create the VRF as we parse interfaces, and auto-allocate the VRF number, removing this control from the user.

Feb 19 2020, 2:18 PM · VyOS 1.3 Equuleus (1.3.0-epa1)
Unknown Object (User) created T2051: Throughput anomalies.
Feb 19 2020, 1:34 PM · VyOS 1.3 Equuleus (1.3.5), VyOS 1.4 Sagitta
c-po added a comment to T31: Add VRF support.

Why do we need to explicitly create the routing table? why not name the routing table entry like the VRFs name? We should try to keep the CLI as minimal as possible. More CLI nodes, more headache.

Feb 19 2020, 8:26 AM · VyOS 1.3 Equuleus (1.3.0-epa1)
c-po changed the status of T1969: OSPF with WireGuard cause Route Inactive from Open to Needs testing.
Feb 19 2020, 6:49 AM · VyOS 1.3 Equuleus (1.3.0)
c-po added a comment to T1969: OSPF with WireGuard cause Route Inactive.

I have just pinned the VyOS 1.3-rolling branch to the official FRR 7.3 release (https://github.com/vyos/vyos-build-frr/commit/076de23ed1d951aafd48d59f6f7ea410288b5991 - which contains your fix).
A new ISO image will be available shortly (it must be more recent then vyos-1.3-rolling-202002190217-amd64.iso. Please give it a try.

Feb 19 2020, 6:48 AM · VyOS 1.3 Equuleus (1.3.0)
tjjh89017 added a comment to T1969: OSPF with WireGuard cause Route Inactive.

I have tested vyos 1.3-rolling-202002130217 (FRR version 7.4-dev-20200118-04-g9e1ecdbaa-0), it failed.
I tested ubuntu with frr master brnach(60092db3fdead2a72e9368aaaa1e789c741c7ce8) and dev/7.3 (df80bf16869314ec9455fb7e4db63dcf1fdba2c2). It worked.
I tested ubuntu with frr 9e1ecdbaa, It failed.

Feb 19 2020, 5:06 AM · VyOS 1.3 Equuleus (1.3.0)

Feb 18 2020

thomas-mangin added a comment to T31: Add VRF support.

should for multiple routing tables:
https://andir.github.io/posts/linux-ip-vrf/
http://www.allgoodbits.org/articles/view/24
https://patchwork.ozlabs.org/patch/546171/

Feb 18 2020, 5:52 PM · VyOS 1.3 Equuleus (1.3.0-epa1)
c-po closed T2034: Removal of interfaces loopback lo removed 127.0.0.1 and ::1 as Resolved.
Feb 18 2020, 4:28 PM · VyOS 1.3 Equuleus (1.3.0)
SteveP added a comment to T2050: Problem migrating from 1.3-rolling-202002050217 to current.
firewall {
    all-ping enable
    broadcast-ping disable
    config-trap disable
    group {
        network-group Private_IPs {
            network 10.0.0.0/8
            network 127.0.0.0/8
            network 172.16.0.0/12
            network 192.168.0.0/16
            network 168.254.0.0/16
            network 169.254.0.0/16
            network 192.0.2.0/24
            network 224.0.0.0/4
            network 240.0.0.0/4
        }
        port-group NetBIOS_TCP {
            port 135-139
            port 445
        }
        port-group NetBIOS_UDP {
            port 137-138
        }
    }
    ipv6-receive-redirects disable
    ipv6-src-route disable
    ip-src-route disable
    log-martians enable
    name accept_all {
        default-action accept
    }
    name private_to_public {
        default-action accept
        rule 9 {
            action accept
            description "Allow admin of Vigor 130"
            destination {
                address 192.168.5.2
                port 443
            }
            protocol tcp
            source {
                address 192.168.3.100
            }
        }
        rule 10 {
            action drop
            description "Stop Local Addresses traversing the WEB"
            destination {
                group {
                    network-group Private_IPs
                }
            }
        }
        rule 20 {
            action drop
            description "Block NetBIOS from LAN to WEB"
            destination {
                group {
                    port-group NetBIOS_TCP
                }
            }
            protocol tcp
        }
        rule 21 {
            action drop
            description "Block NetBIOS from LAN to WEB"
            destination {
                group {
                    port-group NetBIOS_UDP
                }
            }
            protocol udp
        }
    }
    receive-redirects disable
    send-redirects enable
    source-validation disable
    state-policy {
        established {
            action accept
        }
        related {
            action accept
        }
    }
    syn-cookies enable
    twa-hazards-protection disable
}
interfaces {
    ethernet eth0 {
        address 192.168.3.1/24
        duplex auto
        hw-id 4c:02:89:12:16:ce
        smp-affinity auto
        speed auto
    }
    ethernet eth1 {
        address 192.168.1.1/24
        duplex auto
        hw-id 4c:02:89:12:16:cf
        smp-affinity auto
        speed auto
    }
    ethernet eth2 {
        address 192.168.4.1/24
        duplex auto
        hw-id 4c:02:89:12:16:d0
        smp-affinity auto
        speed auto
    }
    ethernet eth3 {
        address 192.168.5.1/24
        duplex auto
        hw-id 4c:02:89:12:16:d1
        mtu 1508
        pppoe 0 {
            default-route auto
            mtu 1500
            name-server none
            password ********
            user-id [email protected]
        }
        smp-affinity auto
        speed auto
    }
    loopback lo {
    }
}
nat {
    source {
        rule 10 {
            outbound-interface pppoe0
            translation {
                address masquerade
            }
        }
    }
}
service {
    dhcp-server {
        shared-network-name ETH0_Pool {
            subnet 192.168.3.0/24 {
                default-router 192.168.3.1
                dns-server 192.168.3.1
                lease 86400
                range 0 {
                    start 192.168.3.100
                    stop 192.168.3.199
                }
                static-mapping NB0001 {
                    ip-address 192.168.3.100
                    mac-address EC:F4:BB:******
                }
            }
        }
        shared-network-name ETH1_Pool {
            subnet 192.168.1.0/24 {
                default-router 192.168.1.1
                dns-server 192.168.1.1
                lease 86400
                range 0 {
                    start 192.168.1.100
                    stop 192.168.1.199
                }
                static-mapping SamsungTV {
                    ip-address 192.168.1.103
                    mac-address cc:b1:1a:******
                }
            }
        }
        shared-network-name ETH2_Pool {
            subnet 192.168.4.0/24 {
                default-router 192.168.4.1
                dns-server 192.168.4.1
                lease 86400
                range 0 {
                    start 192.168.4.100
                    stop 192.168.4.199
                }
            }
        }
    }
    dns {
        forwarding {
            allow-from 0.0.0.0/0
            allow-from ::/0
            cache-size 150
            listen-address 192.168.1.1
            listen-address 192.168.3.1
            listen-address 192.168.4.1
            name-server 194.72.6.51
            name-server 194.74.65.69
        }
    }
    ssh {
        listen-address 192.168.3.1
        port 22
    }
}
system {
    config-management {
        commit-revisions 20
    }
    conntrack {
        expect-table-size 2048
        hash-size 32768
        modules {
            sip {
                disable
            }
        }
        table-size 262144
    }
    console {
        device ttyS0 {
            speed 9600
        }
    }
    host-name home-r1
    login {
        user stevep {
            authentication {
                encrypted-password ********************************************
                plaintext-password ""
            }
            full-name "Steve Palmer"
        }
        user vyos {
            authentication {
                encrypted-password **********************************************
                plaintext-password ""
            }
        }
    }
    name-server 8.8.8.8
    ntp {
        server 0.pool.ntp.org {
        }
        server 1.pool.ntp.org {
        }
        server 2.pool.ntp.org {
        }
    }
    syslog {
        global {
            facility all {
                level notice
            }
            facility protocols {
                level debug
            }
        }
    }
    time-zone Europe/London
}
zone-policy {
    zone local {
        default-action drop
        from private {
            firewall {
                name accept_all
            }
        }
        local-zone
    }
    zone public {
        default-action drop
        description "Public Zone"
        from private {
            firewall {
                name private_to_public
            }
        }
        interface pppoe0
        interface eth3
    }
}
Feb 18 2020, 4:22 PM
c-po added a comment to T2050: Problem migrating from 1.3-rolling-202002050217 to current.

thanks for reporting this. As we always want to maintain config upgrade compatibility could you please share your full config with me so I can reproduce it?

Feb 18 2020, 3:21 PM
c-po claimed T2050: Problem migrating from 1.3-rolling-202002050217 to current.
Feb 18 2020, 3:20 PM
SteveP created T2050: Problem migrating from 1.3-rolling-202002050217 to current.
Feb 18 2020, 12:15 PM
zsdc created T2049: Update strongSwan cipher suites list for IPSec settings.
Feb 18 2020, 10:58 AM · VyOS 1.3 Equuleus (1.3.0)
Unknown Object (User) added a comment to T439: local PBR support.

I'd love for this feature to get back into VyOS. I am available for testing if needed.

Feb 18 2020, 9:19 AM · VyOS 1.4 Sagitta

Feb 17 2020

c-po moved T2032: Monitor bandwidth bits from Need Triage to Finished on the VyOS 1.3 Equuleus board.
Feb 17 2020, 6:57 PM · VyOS 1.2 Crux (VyOS 1.2.5)
c-po moved T2030: Bond doesn't survive reboot from Need Triage to Finished on the VyOS 1.3 Equuleus board.
Feb 17 2020, 6:57 PM · VyOS 1.3 Equuleus (1.3.0)
c-po moved T2047: Update Linux Kernel to v4.19.104 from Need Triage to Finished on the VyOS 1.3 Equuleus board.
Feb 17 2020, 6:57 PM · VyOS 1.3 Equuleus (1.3.0)
c-po moved T2048: ISO boot fails when wireless adapter is present from Need Triage to Finished on the VyOS 1.3 Equuleus board.
Feb 17 2020, 6:57 PM · VyOS 1.3 Equuleus (1.3.0)
c-po closed T2048: ISO boot fails when wireless adapter is present as Resolved.
Feb 17 2020, 6:56 PM · VyOS 1.3 Equuleus (1.3.0)
c-po changed the status of T2048: ISO boot fails when wireless adapter is present from Open to In progress.
Feb 17 2020, 6:48 PM · VyOS 1.3 Equuleus (1.3.0)
c-po created T2048: ISO boot fails when wireless adapter is present.
Feb 17 2020, 6:48 PM · VyOS 1.3 Equuleus (1.3.0)
c-po closed T2047: Update Linux Kernel to v4.19.104 as Resolved.
Feb 17 2020, 4:09 PM · VyOS 1.3 Equuleus (1.3.0)
c-po created T2047: Update Linux Kernel to v4.19.104.
Feb 17 2020, 4:09 PM · VyOS 1.3 Equuleus (1.3.0)
Alfa80 added a watcher for Google Cloud Platform Support : Alfa80.
Feb 17 2020, 12:53 PM
Alfa80 added a watcher for OVA/OVF distribution: Alfa80.
Feb 17 2020, 12:52 PM
Alfa80 added a watcher for VyOS 1.3 Equuleus: Alfa80.
Feb 17 2020, 12:33 PM
thomas-mangin updated the task description for T2046: allowing sub-classes of Interface to redefine how the interface is created.
Feb 17 2020, 5:53 AM · VyOS 1.3 Equuleus (1.3.0)
thomas-mangin created T2046: allowing sub-classes of Interface to redefine how the interface is created.
Feb 17 2020, 5:50 AM · VyOS 1.3 Equuleus (1.3.0)

Feb 16 2020

kabaga created T2045: Can't commit due to with the same name, but different firewall groups types.
Feb 16 2020, 11:21 PM · VyOS 1.3 Equuleus (1.3.6)
primoz created T2044: RPKI doesn't boot properly.
Feb 16 2020, 9:06 PM · VyOS 1.3 Equuleus (1.3.7), VyOS 1.5 Circinus, VyOS 1.4 Sagitta
c-po closed T1246: VyOS 1.2.0 "openvpn-options" configuration does not allow quotes in values as Resolved.
Feb 16 2020, 12:38 PM · VyOS 1.3 Equuleus (1.3.0-epa1)
c-po added a comment to T1246: VyOS 1.2.0 "openvpn-options" configuration does not allow quotes in values.

As in rolling the OpenVPN is rewritten to XML/Python the backport is not easily possible, it must be completely reimplemented in the old Perl code thus we should encourage users to migrate to 1.3 rolling to get better testing.

Feb 16 2020, 12:37 PM · VyOS 1.3 Equuleus (1.3.0-epa1)
c-po closed T1908: Add zone option for Cloudflare DDNS as Resolved.
Feb 16 2020, 12:36 PM · VyOS 1.3 Equuleus (1.3.0)
c-po moved T1908: Add zone option for Cloudflare DDNS from Need Triage to Finished on the VyOS 1.3 Equuleus board.
Feb 16 2020, 12:36 PM · VyOS 1.3 Equuleus (1.3.0)
c-po closed T2015: show openvpn site-to-site result in error when disabled openvpn interface exists as Invalid.
Feb 16 2020, 11:10 AM · VyOS 1.3 Equuleus (1.3.0)
c-po added a comment to T2015: show openvpn site-to-site result in error when disabled openvpn interface exists.

Closing as no response and can not reproduce.

Feb 16 2020, 11:10 AM · VyOS 1.3 Equuleus (1.3.0)
c-po closed T1992: Adding vlan on a bond resets all BGP connections on same bond as Resolved.
Feb 16 2020, 11:00 AM · VyOS 1.3 Equuleus (1.3.0)
c-po moved T1992: Adding vlan on a bond resets all BGP connections on same bond from Need Triage to Finished on the VyOS 1.3 Equuleus board.
Feb 16 2020, 11:00 AM · VyOS 1.3 Equuleus (1.3.0)
c-po added a comment to T1992: Adding vlan on a bond resets all BGP connections on same bond.

tested working on latest rolling. No BGP session reset occured.

Feb 16 2020, 10:59 AM · VyOS 1.3 Equuleus (1.3.0)
c-po closed T2043: Bond VLANs can't be extended on the fly as Resolved.
Feb 16 2020, 10:59 AM · VyOS 1.3 Equuleus (1.3.0)
c-po moved T2043: Bond VLANs can't be extended on the fly from In Progress to Finished on the VyOS 1.3 Equuleus board.
Feb 16 2020, 10:59 AM · VyOS 1.3 Equuleus (1.3.0)
c-po updated the task description for T2043: Bond VLANs can't be extended on the fly.
Feb 16 2020, 10:50 AM · VyOS 1.3 Equuleus (1.3.0)
c-po updated the task description for T2043: Bond VLANs can't be extended on the fly.
Feb 16 2020, 10:45 AM · VyOS 1.3 Equuleus (1.3.0)
c-po moved T2043: Bond VLANs can't be extended on the fly from Need Triage to In Progress on the VyOS 1.3 Equuleus board.
Feb 16 2020, 10:43 AM · VyOS 1.3 Equuleus (1.3.0)
c-po claimed T2043: Bond VLANs can't be extended on the fly.
Feb 16 2020, 10:43 AM · VyOS 1.3 Equuleus (1.3.0)
c-po created T2043: Bond VLANs can't be extended on the fly.
Feb 16 2020, 10:42 AM · VyOS 1.3 Equuleus (1.3.0)
c-po added a comment to T2030: Bond doesn't survive reboot.

Thanks for reporting this nasty issue. The fix is applied to rolling release starting with build: vyos-1.3-rolling-202002161021-amd64.iso

Feb 16 2020, 10:39 AM · VyOS 1.3 Equuleus (1.3.0)
c-po closed T2030: Bond doesn't survive reboot as Resolved.
Feb 16 2020, 9:58 AM · VyOS 1.3 Equuleus (1.3.0)

Feb 15 2020

c-po added a comment to T2030: Bond doesn't survive reboot.

There is a faulty delta check in interfaces-bonding.py leading to the fact that physical interfaces are not enslaved. As soon as they are enslaved all works (eth2 and eth3 in my case):

Feb 15 2020, 7:44 PM · VyOS 1.3 Equuleus (1.3.0)
c-po closed T2041: Adding non existent bond interface raises exception as Resolved.
Feb 15 2020, 6:53 PM · VyOS 1.3 Equuleus (1.3.0)
c-po moved T2041: Adding non existent bond interface raises exception from Need Triage to Finished on the VyOS 1.3 Equuleus board.
Feb 15 2020, 6:53 PM · VyOS 1.3 Equuleus (1.3.0)
c-po renamed T2041: Adding non existent bond interface raises exception from Adding non existent bond interface rraises exception to Adding non existent bond interface raises exception.
Feb 15 2020, 6:42 PM · VyOS 1.3 Equuleus (1.3.0)
c-po closed T2042: Error on reboot after deleting "service snmp" and not "service lldp snmp enable" as Resolved.
Feb 15 2020, 6:42 PM · VyOS 1.3 Equuleus (1.3.0)
c-po moved T2042: Error on reboot after deleting "service snmp" and not "service lldp snmp enable" from Need Triage to Finished on the VyOS 1.3 Equuleus board.
Feb 15 2020, 6:39 PM · VyOS 1.3 Equuleus (1.3.0)
c-po claimed T2042: Error on reboot after deleting "service snmp" and not "service lldp snmp enable".
Feb 15 2020, 6:34 PM · VyOS 1.3 Equuleus (1.3.0)
c-po updated the task description for T2042: Error on reboot after deleting "service snmp" and not "service lldp snmp enable".
Feb 15 2020, 6:33 PM · VyOS 1.3 Equuleus (1.3.0)
c-po created T2042: Error on reboot after deleting "service snmp" and not "service lldp snmp enable".
Feb 15 2020, 6:33 PM · VyOS 1.3 Equuleus (1.3.0)
c-po claimed T2041: Adding non existent bond interface raises exception.
Feb 15 2020, 5:32 PM · VyOS 1.3 Equuleus (1.3.0)
c-po created T2041: Adding non existent bond interface raises exception.
Feb 15 2020, 5:29 PM · VyOS 1.3 Equuleus (1.3.0)
c-po changed the status of T2030: Bond doesn't survive reboot from Confirmed to In progress.
Feb 15 2020, 1:11 PM · VyOS 1.3 Equuleus (1.3.0)