Page MenuHomeVyOS Platform

alainlamar (Alain Lamar)
User

Projects

User Details

User Since
Jun 14 2016, 4:15 PM (211 w, 2 d)

Recent Activity

Apr 18 2020

alainlamar closed T2210: vyos-1x: WiFi interfaces as bridge slaves, hostapd config items missing as Invalid.

The hostapd.conf says that this might not be needed anymore.

Apr 18 2020, 9:49 PM · VyOS 1.3 Equuleus
alainlamar closed T2312: Use LED modules to enable more visible feedback on VyOS hardware chassis as Resolved.
Apr 18 2020, 8:55 PM · VyOS 1.3 Equuleus
alainlamar added a comment to T2312: Use LED modules to enable more visible feedback on VyOS hardware chassis.

Thought about some quirks. Did not touch the reset button yet but had in mind to use it as some ACPI power button to enable cold boot by pressing a button, not unplugging and replugging odd wires. Resetting the config by that button would be a waste of that button. You would have to hook up to the APU board by serial again in order to revive it. If you did so, you might as well just have moved away the bad config and reboot :-) Once I get a hang of how that reset button works (gotta look into the GPIO stuff), I'll open a new ticket. Maybe we can add some generic config wizzardry to set up LEDs and GPIOs once we get a good grasp on it.

Apr 18 2020, 8:55 PM · VyOS 1.3 Equuleus
alainlamar closed T2306: Add new cipher suites to the WiFi configuration as Resolved.
Apr 18 2020, 8:45 PM · VyOS 1.3 Equuleus

Apr 17 2020

alainlamar added a comment to T2312: Use LED modules to enable more visible feedback on VyOS hardware chassis.

Pull request: https://github.com/vyos/vyos-build-kernel/pull/6

Apr 17 2020, 10:30 PM · VyOS 1.3 Equuleus
alainlamar claimed T2312: Use LED modules to enable more visible feedback on VyOS hardware chassis.
Apr 17 2020, 9:54 PM · VyOS 1.3 Equuleus
alainlamar created T2312: Use LED modules to enable more visible feedback on VyOS hardware chassis.
Apr 17 2020, 9:53 PM · VyOS 1.3 Equuleus
alainlamar added a comment to T2306: Add new cipher suites to the WiFi configuration.

Pull request: https://github.com/vyos/vyos-1x/pull/353

Apr 17 2020, 8:59 PM · VyOS 1.3 Equuleus

Apr 16 2020

alainlamar claimed T2306: Add new cipher suites to the WiFi configuration.
Apr 16 2020, 9:56 PM · VyOS 1.3 Equuleus
alainlamar created T2306: Add new cipher suites to the WiFi configuration.
Apr 16 2020, 9:55 PM · VyOS 1.3 Equuleus

Apr 14 2020

alainlamar closed T2213: vyos-1x: WiFi mode ieee80211ac should also activate ieee80211n as Resolved.
Apr 14 2020, 7:04 PM · VyOS 1.3 Equuleus
alainlamar closed T2290: pdns recursor does not resolve .io domains as Invalid.

thanks for explaining the backgrounds! I wonder if a removal of the hostfile-update option should be suggested.

Apr 14 2020, 1:36 PM · VyOS 1.3 Equuleus
alainlamar created T2291: Bad hostnames in /etc/hosts with static-mapping in dhcp server config.
Apr 14 2020, 9:35 AM · VyOS 1.3 Equuleus
alainlamar added a comment to T2290: pdns recursor does not resolve .io domains.

Found the culprit.

Apr 14 2020, 9:19 AM · VyOS 1.3 Equuleus
alainlamar updated the task description for T2290: pdns recursor does not resolve .io domains.
Apr 14 2020, 6:32 AM · VyOS 1.3 Equuleus
alainlamar updated the task description for T2290: pdns recursor does not resolve .io domains.
Apr 14 2020, 6:27 AM · VyOS 1.3 Equuleus
alainlamar created T2290: pdns recursor does not resolve .io domains.
Apr 14 2020, 6:26 AM · VyOS 1.3 Equuleus

Apr 11 2020

alainlamar added a comment to T2213: vyos-1x: WiFi mode ieee80211ac should also activate ieee80211n.

Uh, that's nice easter eggs folks :-) Thank you both for your valuable hints! They'll be very handy!

Apr 11 2020, 8:23 PM · VyOS 1.3 Equuleus
alainlamar added a comment to T2213: vyos-1x: WiFi mode ieee80211ac should also activate ieee80211n.

Pull request: https://github.com/vyos/vyos-1x/pull/330

Apr 11 2020, 5:07 PM · VyOS 1.3 Equuleus
alainlamar closed T2233: Typos in wlanX.cfg as Resolved.
Apr 11 2020, 3:17 PM · VyOS 1.3 Equuleus

Apr 5 2020

alainlamar claimed T2233: Typos in wlanX.cfg.
Apr 5 2020, 8:10 PM · VyOS 1.3 Equuleus
alainlamar added a comment to T2233: Typos in wlanX.cfg.

Pull request: https://github.com/vyos/vyos-1x/pull/306

Apr 5 2020, 7:48 PM · VyOS 1.3 Equuleus
alainlamar created T2233: Typos in wlanX.cfg.
Apr 5 2020, 7:38 PM · VyOS 1.3 Equuleus
alainlamar closed T2212: vyos-1x: WiFi card antenna count not set accordingly as Resolved.
Apr 5 2020, 6:36 PM · VyOS 1.3 Equuleus
alainlamar claimed T2212: vyos-1x: WiFi card antenna count not set accordingly.
Apr 5 2020, 10:03 AM · VyOS 1.3 Equuleus
alainlamar added a comment to T2212: vyos-1x: WiFi card antenna count not set accordingly.

Pull request: https://github.com/vyos/vyos-1x/pull/305

Apr 5 2020, 10:03 AM · VyOS 1.3 Equuleus

Apr 4 2020

alainlamar added a comment to T2213: vyos-1x: WiFi mode ieee80211ac should also activate ieee80211n.

These are the VyOS 1.2 configuration commands for a mixed-mode 5GHz AP:

Apr 4 2020, 9:15 PM · VyOS 1.3 Equuleus
alainlamar added a comment to T2213: vyos-1x: WiFi mode ieee80211ac should also activate ieee80211n.

Found it. My bad.

Apr 4 2020, 9:04 PM · VyOS 1.3 Equuleus
alainlamar added a comment to T2211: vyos-1x: VHT channel width not set accordingly.

Pull request: https://github.com/vyos/vyos-1x/pull/303

Apr 4 2020, 4:57 PM · VyOS 1.3 Equuleus
alainlamar added a comment to T2208: vyos-1x: commit on interfaces wireless wlanX capabilities vht link-adaptation (both|unsolicited) fails.

Pull request: https://github.com/vyos/vyos-1x/pull/301

Apr 4 2020, 3:38 PM · VyOS 1.3 Equuleus
alainlamar updated the task description for T2208: vyos-1x: commit on interfaces wireless wlanX capabilities vht link-adaptation (both|unsolicited) fails.
Apr 4 2020, 3:26 PM · VyOS 1.3 Equuleus
alainlamar added a comment to T2210: vyos-1x: WiFi interfaces as bridge slaves, hostapd config items missing.

This is the logic from my old wireless-hostapd.pl file:

Apr 4 2020, 1:54 PM · VyOS 1.3 Equuleus
alainlamar added a comment to T2211: vyos-1x: VHT channel width not set accordingly.

This is the logic from my old wireless-hostapd.pl file:

Apr 4 2020, 12:01 PM · VyOS 1.3 Equuleus
alainlamar added a comment to T2212: vyos-1x: WiFi card antenna count not set accordingly.

Here is the logic from my old wireless-hostapd.pl file:

Apr 4 2020, 11:56 AM · VyOS 1.3 Equuleus
alainlamar added a comment to T2213: vyos-1x: WiFi mode ieee80211ac should also activate ieee80211n.

Aye, from what I see in my old wireless-hostap.pl, logic should go like this. Every "print" is output to the wlanX.cfg which serves as config input for hostapd.

Apr 4 2020, 11:46 AM · VyOS 1.3 Equuleus

Apr 3 2020

alainlamar created T2213: vyos-1x: WiFi mode ieee80211ac should also activate ieee80211n.
Apr 3 2020, 10:24 PM · VyOS 1.3 Equuleus
alainlamar created T2212: vyos-1x: WiFi card antenna count not set accordingly.
Apr 3 2020, 10:13 PM · VyOS 1.3 Equuleus
alainlamar created T2211: vyos-1x: VHT channel width not set accordingly.
Apr 3 2020, 9:57 PM · VyOS 1.3 Equuleus
alainlamar created T2210: vyos-1x: WiFi interfaces as bridge slaves, hostapd config items missing.
Apr 3 2020, 9:30 PM · VyOS 1.3 Equuleus
alainlamar updated the task description for T2208: vyos-1x: commit on interfaces wireless wlanX capabilities vht link-adaptation (both|unsolicited) fails.
Apr 3 2020, 9:02 PM · VyOS 1.3 Equuleus
alainlamar created T2208: vyos-1x: commit on interfaces wireless wlanX capabilities vht link-adaptation (both|unsolicited) fails.
Apr 3 2020, 7:36 PM · VyOS 1.3 Equuleus

Sep 5 2018

alainlamar added a comment to T831: NTP daemon won't synchronize with "restrict default ignore".

Thanks for fixing! Took me half a day today to figure this out :)

Sep 5 2018, 8:26 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar added a comment to T831: NTP daemon won't synchronize with "restrict default ignore".

In "broken" mode, no, as clients will refuse to sync to an unsynchrinized server. That's how I stumbled across this in first place.
In "fixed" mode, once NTPd is synced again, clients will fetch time from VyOS. On my testbed, I have this (now working) config:

Sep 5 2018, 8:17 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar created T831: NTP daemon won't synchronize with "restrict default ignore".
Sep 5 2018, 7:46 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Aug 12 2018

alainlamar added a comment to T763: Wireless hw_mode=a with ACS , not working.

Hi there,

Aug 12 2018, 8:25 AM · VyOS 1.3 Equuleus

Feb 18 2018

alainlamar updated the task description for T550: vyatta-wireless: Increase version number.
Feb 18 2018, 11:10 AM · Rejected
alainlamar updated the task description for T549: CI: Clearfog build host cannot connect to dev.packages.vyos.net.
Feb 18 2018, 11:04 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar added a comment to T550: vyatta-wireless: Increase version number.

I seem to be wrong with my initial statement where to set the version. The file debian/vyatta-wireless/DEBIAN/control is not even in version control and I can't seem to find a hint on where this version string 0.3.41+vyos2+current1 really comes from.

Feb 18 2018, 11:01 AM · Rejected
alainlamar changed the status of T550: vyatta-wireless: Increase version number from Open to In progress.
Feb 18 2018, 10:33 AM · Rejected
alainlamar created T549: CI: Clearfog build host cannot connect to dev.packages.vyos.net.
Feb 18 2018, 10:14 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Feb 11 2018

alainlamar added a comment to T544: Package vyatta-wireless misses config scripts.

Pull request sent. Please consider for merge.

Feb 11 2018, 10:57 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar created T544: Package vyatta-wireless misses config scripts.
Feb 11 2018, 10:49 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar added a comment to T452: WiFi: Enable support for 5GHz AccesPoints with DFS.

Cheers @c-po! Unfortunately, the build failed with reference to "clearfog". Do you know what this is or if I could fix this somehow in vyatta-wireless?
Right now, I have no idea...

Feb 11 2018, 5:09 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar added a comment to T452: WiFi: Enable support for 5GHz AccesPoints with DFS.

Merged.
It will have to be refactored for the new vyos-1x approach, but then the entire package will, so we'll better have the .ac support now, and refactor later.

Feb 11 2018, 12:58 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar closed T529: Create op command to set regulatory domain as Resolved.
Feb 11 2018, 12:55 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar closed T529: Create op command to set regulatory domain, a subtask of T452: WiFi: Enable support for 5GHz AccesPoints with DFS, as Resolved.
Feb 11 2018, 12:55 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar closed T452: WiFi: Enable support for 5GHz AccesPoints with DFS as Resolved.
Feb 11 2018, 12:55 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Feb 4 2018

alainlamar added a comment to T529: Create op command to set regulatory domain.

As pointed out in T529#11515, I rewrote this command to now do the following:

Feb 4 2018, 11:24 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Feb 3 2018

alainlamar added a comment to T452: WiFi: Enable support for 5GHz AccesPoints with DFS.

I'd like to prompt for a decision:

  • break backward compatibility to implement the above scheme (I'd suggest that) or
  • stick with this pull request (T452) and work around the regdom-setting by using the existing pull request in T529.
Feb 3 2018, 10:58 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Jan 30 2018

alainlamar added a comment to T452: WiFi: Enable support for 5GHz AccesPoints with DFS.

I had a chat with @syncer yesterday, where we also discussed the approach of setting WiFi regulatory domains. We agreed upon two issues prompting for an Architect's decision (@dmbaturin):

  • Code that does persistent changes should go to the configure section. This would mean three things:
    • The part writing to files would be moved from T529 to T452.
    • Backward compatibility in T452 would be broken as the set interfaces wireless wlanX country DE node would be moved in front of the interface name tag config node: set interfaces wireless regulatory-domain DE which would allow for a complete and easy to understand way of making all persistent changes in one go. [...]
Jan 30 2018, 7:32 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar added a comment to T529: Create op command to set regulatory domain.

Hi folks,

Jan 30 2018, 7:26 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Jan 28 2018

alainlamar added a comment to Q128: How would contributors signal to the maintainers that a feature was ready for review / merge?.

I'll be available this Monday and Thursday after 21:30 until 23:30 CET.

Jan 28 2018, 10:02 PM · VyOS 1.2 Crux
alainlamar added a comment to Q128: How would contributors signal to the maintainers that a feature was ready for review / merge?.

I agree with your approach on handing in bug reports and feature requests. What I try to figure out is how folks trying to solve these bugs and implement feature requests would best approach maintainers. Since there is very few maintainers and they spend their spare time on VyOS project maintainance, I think there should be guidelines for folks (like me) on how to hand in code for review - and maybe how not to. This, I hope, would allow maintainers to accept more pull requests with less use of their valuable spare time.

Jan 28 2018, 9:49 PM · VyOS 1.2 Crux
alainlamar added a comment to Q128: How would contributors signal to the maintainers that a feature was ready for review / merge?.

Thanks mate,

Jan 28 2018, 9:07 PM · VyOS 1.2 Crux
alainlamar added a comment to Q128: How would contributors signal to the maintainers that a feature was ready for review / merge? (Answer 176).

Cheers mate!

Jan 28 2018, 8:36 PM

Jan 27 2018

alainlamar updated the task description for T517: Rewrite the wireless interface configuration in the new style (python + XML).
Jan 27 2018, 9:48 PM · VyOS 1.3 Equuleus
alainlamar claimed T517: Rewrite the wireless interface configuration in the new style (python + XML).
Jan 27 2018, 9:45 PM · VyOS 1.3 Equuleus
alainlamar moved T517: Rewrite the wireless interface configuration in the new style (python + XML) from Need Triage to Backlog on the VyOS 1.3 Equuleus board.
Jan 27 2018, 9:44 PM · VyOS 1.3 Equuleus
alainlamar moved T518: Move VyOS configuration syntax from Bash and node.def to XML from Need Triage to Backlog on the VyOS 1.3 Equuleus board.
Jan 27 2018, 9:43 PM · Invalid
alainlamar moved T529: Create op command to set regulatory domain from Need Triage to In Progress on the VyOS 1.3 Equuleus board.
Jan 27 2018, 9:43 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar moved T452: WiFi: Enable support for 5GHz AccesPoints with DFS from Backlog to In Progress on the VyOS 1.3 Equuleus board.
Jan 27 2018, 9:42 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar moved T452: WiFi: Enable support for 5GHz AccesPoints with DFS from Need Triage to In Progress on the VyOS 1.2 Crux board.
Jan 27 2018, 9:41 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar moved T529: Create op command to set regulatory domain from Need Triage to In Progress on the VyOS 1.2 Crux board.
Jan 27 2018, 9:41 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar reopened T529: Create op command to set regulatory domain as "In progress".
Jan 27 2018, 9:40 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar reopened T529: Create op command to set regulatory domain, a subtask of T452: WiFi: Enable support for 5GHz AccesPoints with DFS, as In progress.
Jan 27 2018, 9:40 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar closed T529: Create op command to set regulatory domain as Resolved.
Jan 27 2018, 9:39 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar closed T529: Create op command to set regulatory domain, a subtask of T452: WiFi: Enable support for 5GHz AccesPoints with DFS, as Resolved.
Jan 27 2018, 9:39 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar changed Difficulty level from unknown to normal on T529: Create op command to set regulatory domain.
Jan 27 2018, 9:38 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar changed Difficulty level from unknown to hard on T452: WiFi: Enable support for 5GHz AccesPoints with DFS.
Jan 27 2018, 9:37 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar updated the question details for Q128: How would contributors signal to the maintainers that a feature was ready for review / merge?.
Jan 27 2018, 1:04 PM · VyOS 1.2 Crux
alainlamar asked Q128: How would contributors signal to the maintainers that a feature was ready for review / merge?.
Jan 27 2018, 1:03 PM · VyOS 1.2 Crux

Jan 26 2018

alainlamar updated the task description for T452: WiFi: Enable support for 5GHz AccesPoints with DFS.
Jan 26 2018, 10:21 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Jan 23 2018

alainlamar changed the status of T529: Create op command to set regulatory domain from Open to In progress.
Jan 23 2018, 10:17 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar changed the status of T529: Create op command to set regulatory domain, a subtask of T452: WiFi: Enable support for 5GHz AccesPoints with DFS, from Open to In progress.
Jan 23 2018, 10:17 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar changed the status of T452: WiFi: Enable support for 5GHz AccesPoints with DFS from Open to In progress.
Jan 23 2018, 10:16 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar claimed T452: WiFi: Enable support for 5GHz AccesPoints with DFS.
Jan 23 2018, 10:12 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar added a comment to T529: Create op command to set regulatory domain.

Pull request created: https://github.com/vyos/vyatta-wireless/pull/9/files

Jan 23 2018, 10:11 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar created T529: Create op command to set regulatory domain.
Jan 23 2018, 8:50 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Jan 21 2018

alainlamar added a comment to T452: WiFi: Enable support for 5GHz AccesPoints with DFS.

Pull request sent. Please consider a merge.

Jan 21 2018, 6:11 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Jan 18 2018

alainlamar updated the task description for T452: WiFi: Enable support for 5GHz AccesPoints with DFS.
Jan 18 2018, 7:34 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Jan 14 2018

alainlamar added a comment to T452: WiFi: Enable support for 5GHz AccesPoints with DFS.

@syncer thanks for the offer :)

Jan 14 2018, 8:01 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar renamed T521: Network services may fail if vyatta-router.service startup takes longer than a few seconds from Network services may fail if vyatta-router.service startup takes longe rthan a few seconds to Network services may fail if vyatta-router.service startup takes longer than a few seconds.
Jan 14 2018, 4:49 PM · VyOS 1.3 Equuleus
alainlamar renamed T521: Network services may fail if vyatta-router.service startup takes longer than a few seconds from Network Services start before vyatta-router.service is started to Network services may fail if vyatta-router.service startup takes longe rthan a few seconds.
Jan 14 2018, 4:49 PM · VyOS 1.3 Equuleus
alainlamar created T521: Network services may fail if vyatta-router.service startup takes longer than a few seconds.
Jan 14 2018, 4:47 PM · VyOS 1.3 Equuleus
alainlamar updated the task description for T452: WiFi: Enable support for 5GHz AccesPoints with DFS.
Jan 14 2018, 1:52 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Jan 13 2018

alainlamar updated the task description for T452: WiFi: Enable support for 5GHz AccesPoints with DFS.
Jan 13 2018, 1:10 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar updated the task description for T452: WiFi: Enable support for 5GHz AccesPoints with DFS.
Jan 13 2018, 12:57 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar updated the task description for T452: WiFi: Enable support for 5GHz AccesPoints with DFS.
Jan 13 2018, 12:54 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
alainlamar updated the task description for T452: WiFi: Enable support for 5GHz AccesPoints with DFS.
Jan 13 2018, 12:47 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Jan 7 2018

alainlamar updated the task description for T452: WiFi: Enable support for 5GHz AccesPoints with DFS.
Jan 7 2018, 10:12 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)