In current VLAN-aware bridges, all VLANs must be addressed through sub-interfaces, such as:
```
set interfaces bridge br1 member interface eth0 allowed-vlan 2
set interfaces bridge br1 member interface eth0 native-vlan 1
set interfaces bridge br1 vif 1 address 192.168.1.1/24
```
However, due to the lack of verification, the following settings can be made:
```
set interfaces bridge br1 address 192.168.1.1/24
```
This is inconsistent with the design specification and should be repaired. This will also cause some misleading to the user. There will be conflicts when the following settings exist:
```
set interfaces bridge br1 vif 1 address 192.168.1.1/24
set interfaces bridge br1 address 192.168.1.1/24
```
Edit: Modify the implementation, the following configurations are not allowed:
```
set interfaces bridge br1 vif 1 address 192.168.1.1/24
```
The VLAN ID of the parent interface of the bridge is always limited to 1