Change Details

Hi, when upgrading from 1.2.6-S1 to 1.2.7 the routes comes up correctly on the first boot. However on subsequent reboots the interface ordering is off which leads to the router going offline. VyOS is running on baremetal, Supermicro server, Dual 10GBe HP NIC (qlogic) Config snippets: 1.2.6-S1: ``` set interfaces ethernet eth2 hw-id 'a0:1d:48:98:b3:ec' set interfaces ethernet eth3 hw-id 'a0:1d:48:98:b3:e8' ``` Reboot to 1.2.7 (router still works): ``` set interfaces ethernet eth2 hw-id 'a0:1d:48:98:b3:ec' set interfaces ethernet eth3 hw-id 'a0:1d:48:98:b3:e8' ``` 2nd reboot, 1.2.7 -> 1.2.7 (router down until cables are swapped): ``` set interfaces ethernet eth2 hw-id 'a0:1d:48:98:b3:e8' set interfaces ethernet eth3 hw-id 'a0:1d:48:98:b3:ec' ``` Fortunately in this my setup both 10GBe ports go to the same switch so I now have it configured to work both ways - hence I can be helpful in getting debug data if needed.

Hi, when upgrading from 1.2.6-S1 to 1.2.7 the router comes up correctly on the first boot. However on subsequent reboots the interface ordering is off which leads to the router going offline. VyOS is running on baremetal, Supermicro server, Dual 10GBe HP NIC (qlogic) Config snippets: 1.2.6-S1: ``` set interfaces ethernet eth2 hw-id 'a0:1d:48:98:b3:ec' set interfaces ethernet eth3 hw-id 'a0:1d:48:98:b3:e8' ``` Reboot to 1.2.7 (router still works): ``` set interfaces ethernet eth2 hw-id 'a0:1d:48:98:b3:ec' set interfaces ethernet eth3 hw-id 'a0:1d:48:98:b3:e8' ``` 2nd reboot, 1.2.7 -> 1.2.7 (router down until cables are swapped): ``` set interfaces ethernet eth2 hw-id 'a0:1d:48:98:b3:e8' set interfaces ethernet eth3 hw-id 'a0:1d:48:98:b3:ec' ``` Fortunately in this my setup both 10GBe ports go to the same switch so I now have it configured to work both ways - hence I can be helpful in getting debug data if needed.

Hi, when upgrading from 1.2.6-S1 to 1.2.7 the routesr comes up correctly on the first boot. However on subsequent reboots the interface ordering is off which leads to the router going offline. VyOS is running on baremetal, Supermicro server, Dual 10GBe HP NIC (qlogic) Config snippets: 1.2.6-S1: ``` set interfaces ethernet eth2 hw-id 'a0:1d:48:98:b3:ec' set interfaces ethernet eth3 hw-id 'a0:1d:48:98:b3:e8' ``` Reboot to 1.2.7 (router still works): ``` set interfaces ethernet eth2 hw-id 'a0:1d:48:98:b3:ec' set interfaces ethernet eth3 hw-id 'a0:1d:48:98:b3:e8' ``` 2nd reboot, 1.2.7 -> 1.2.7 (router down until cables are swapped): ``` set interfaces ethernet eth2 hw-id 'a0:1d:48:98:b3:e8' set interfaces ethernet eth3 hw-id 'a0:1d:48:98:b3:ec' ``` Fortunately in this my setup both 10GBe ports go to the same switch so I now have it configured to work both ways - hence I can be helpful in getting debug data if needed.