The next-hop-self on the neighbor config is not working. I expected it to set next-hop IP of the IP I am using to peer with my iBGP neighbor.
This router is a Route reflector.
Topology:
{F439564}
route-reflector config:
```
protocols {
bgp 65000 {
neighbor 192.168.1.2 {
remote-as 65000
}
neighbor 192.168.2.2 {
address-family {
ipv4-unicast {
nexthop-self
route-reflector-client
}
}
remote-as 65000
}
}
}
```
However, if I use the keyword in `force`/`all` does not exist in vyos
```
Configuration path: protocols bgp 65000 neighbor 192.168.2.2 address-family ipv4-unicast nexthop-self [force] is nod
Set failed
```
setting it under `vtysh` does work as expected
```vyos-dup# show running-config
Building configuration...
Current configuration:
!
frr version 7.0.1-20190820-04-g047efd6
frr defaults traditional
hostname vyos-dup
log syslog informational
service integrated-vtysh-config
!
router bgp 65000
neighbor 192.168.1.2 remote-as 65000
neighbor 192.168.2.2 remote-as 65000
!
address-family ipv4 unicast
neighbor 192.168.1.2 next-hop-self force
neighbor 192.168.2.2 route-reflector-client
neighbor 192.168.2.2 next-hop-self force
neighbor 192.168.2.2 next-hop-self
exit-address-family
!
line vty
```