Change Details

I am using following set of vyos commands #delete interfaces wireless #commit #set system wifi-regulatory-domain US #set interfaces wireless wlan0 physical-device phy0 #set interfaces wireless wlan0 hw-id xx:xx:xx:xx:xx:xx #set interfaces wireless wlan0 mac xx:xx:xx:xx:xx:xx #commit #set interfaces wireless wlan0 type access-point #set interfaces wireless wlan0 mode a #set interfaces wireless wlan0 channel 0 #set interfaces wireless wlan0 ssid testSSID0 #commit do not start hostapd, so I restart in manually #sudo /opt/vyatta/sbin/hostapd-init restart wlan0 it did not start testSSID0. to debug the issue, I even tried to running the hostapd manually using #sudo hostapd /var/run/wlan0.cfg but I get error as hostapd: /usr/lib/aarch64-linux-gnu/libssl.so.1.0.0: no version information available (required by hostapd) hostapd: /usr/lib/aarch64-linux-gnu/libssl.so.1.0.0: no version information available (required by hostapd) hostapd: /usr/lib/aarch64-linux-gnu/libcrypto.so.1.0.0: no version information available (required by hostapd) Configuration file: /var/run/hostapd/wlan0.cfg wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE ACS: Automatic channel selection started, this may take a bit wlan0: interface state COUNTRY_UPDATE->ACS wlan0: ACS-STARTED ACS: Unable to collect survey data ACS: All study options have failed Interface initialization failed wlan0: interface state ACS->DISABLED wlan0: AP-DISABLED ACS: Possibly channel configuration is invalid, please report this along with your config file. ACS: Failed to start wlan0: AP-DISABLED hostapd_free_hapd_data: Interface wlan0 wasn’t started wlan0: interface state DISABLED->DISABLED hostapd_free_hapd_data: Interface wlan0 wasn’t started **hostapd.conf** Hostapd configuration for wlan4 interface=wlan0 driver=nl80211 logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=4 country_code=US ieee80211d=1 ssid=testSSID0 channel=0 hw_mode=a ieee80211w=0 macaddr_acl=0 ap_isolate=1 auth_algs=1 tx_queue_data3_aifs=7 tx_queue_data3_cwmin=15 tx_queue_data3_cwmax=1023 tx_queue_data3_burst=0 tx_queue_data2_aifs=3 tx_queue_data2_cwmin=15 tx_queue_data2_cwmax=63 tx_queue_data2_burst=0 tx_queue_data1_aifs=1 tx_queue_data1_cwmin=7 tx_queue_data1_cwmax=15 tx_queue_data1_burst=3.0 tx_queue_data0_aifs=1 tx_queue_data0_cwmin=3 tx_queue_data0_cwmax=7 tx_queue_data0_burst=1.5 wmm_ac_bk_cwmin=4 wmm_ac_bk_cwmax=10 wmm_ac_bk_aifs=7 wmm_ac_bk_txop_limit=0 wmm_ac_bk_acm=0 wmm_ac_be_aifs=3 wmm_ac_be_cwmin=4 wmm_ac_be_cwmax=10 wmm_ac_be_txop_limit=0 wmm_ac_be_acm=0 wmm_ac_vi_aifs=2 wmm_ac_vi_cwmin=3 wmm_ac_vi_cwmax=4 wmm_ac_vi_txop_limit=94 wmm_ac_vi_acm=0 wmm_ac_vo_aifs=2 wmm_ac_vo_cwmin=2 wmm_ac_vo_cwmax=3 wmm_ac_vo_txop_limit=47 wmm_ac_vo_acm=0

I am using following set of vyos commands #delete interfaces wireless #commit #set system wifi-regulatory-domain US #set interfaces wireless wlan4 physical-device phy0 #set interfaces wireless wlan4 hw-id xx:xx:xx:xx:xx:xx #set interfaces wireless wlan4 mac xx:xx:xx:xx:xx:xx #commit #set interfaces wireless wlan4 type access-point #set interfaces wireless wlan4 mode a #set interfaces wireless wlan4 channel 0 #set interfaces wireless wlan4 ssid testSSID0 #commit do not start hostapd, so I restart in manually #sudo /opt/vyatta/sbin/hostapd-init restart wlan4 it did not start testSSID0. to debug the issue, I even tried to running the hostapd manually using #sudo hostapd /var/run/wlan4.cfg but I get error as hostapd: /usr/lib/aarch64-linux-gnu/libssl.so.1.0.0: no version information available (required by hostapd) hostapd: /usr/lib/aarch64-linux-gnu/libssl.so.1.0.0: no version information available (required by hostapd) hostapd: /usr/lib/aarch64-linux-gnu/libcrypto.so.1.0.0: no version information available (required by hostapd) Configuration file: /var/run/hostapd/wlan4.cfg wlan4: interface state UNINITIALIZED->COUNTRY_UPDATE ACS: Automatic channel selection started, this may take a bit wlan4: interface state COUNTRY_UPDATE->ACS wlan4: ACS-STARTED ACS: Unable to collect survey data ACS: All study options have failed Interface initialization failed wlan4: interface state ACS->DISABLED wlan4: AP-DISABLED ACS: Possibly channel configuration is invalid, please report this along with your config file. ACS: Failed to start wlan4: AP-DISABLED hostapd_free_hapd_data: Interface wlan4 wasn’t started wlan4: interface state DISABLED->DISABLED hostapd_free_hapd_data: Interface wlan4 wasn’t started **hostapd.conf** Hostapd configuration for wlan4 interface=wlan4 driver=nl80211 logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=4 country_code=US ieee80211d=1 ssid=testSSID0 channel=0 hw_mode=a ieee80211w=0 macaddr_acl=0 ap_isolate=1 auth_algs=1 tx_queue_data3_aifs=7 tx_queue_data3_cwmin=15 tx_queue_data3_cwmax=1023 tx_queue_data3_burst=0 tx_queue_data2_aifs=3 tx_queue_data2_cwmin=15 tx_queue_data2_cwmax=63 tx_queue_data2_burst=0 tx_queue_data1_aifs=1 tx_queue_data1_cwmin=7 tx_queue_data1_cwmax=15 tx_queue_data1_burst=3.0 tx_queue_data0_aifs=1 tx_queue_data0_cwmin=3 tx_queue_data0_cwmax=7 tx_queue_data0_burst=1.5 wmm_ac_bk_cwmin=4 wmm_ac_bk_cwmax=10 wmm_ac_bk_aifs=7 wmm_ac_bk_txop_limit=0 wmm_ac_bk_acm=0 wmm_ac_be_aifs=3 wmm_ac_be_cwmin=4 wmm_ac_be_cwmax=10 wmm_ac_be_txop_limit=0 wmm_ac_be_acm=0 wmm_ac_vi_aifs=2 wmm_ac_vi_cwmin=3 wmm_ac_vi_cwmax=4 wmm_ac_vi_txop_limit=94 wmm_ac_vi_acm=0 wmm_ac_vo_aifs=2 wmm_ac_vo_cwmin=2 wmm_ac_vo_cwmax=3 wmm_ac_vo_txop_limit=47 wmm_ac_vo_acm=0

I am using following set of vyos commands #delete interfaces wireless #commit #set system wifi-regulatory-domain US #set interfaces wireless wlan04 physical-device phy0 #set interfaces wireless wlan04 hw-id xx:xx:xx:xx:xx:xx #set interfaces wireless wlan04 mac xx:xx:xx:xx:xx:xx #commit #set interfaces wireless wlan04 type access-point #set interfaces wireless wlan04 mode a #set interfaces wireless wlan04 channel 0 #set interfaces wireless wlan04 ssid testSSID0 #commit do not start hostapd, so I restart in manually #sudo /opt/vyatta/sbin/hostapd-init restart wlan04 it did not start testSSID0. to debug the issue, I even tried to running the hostapd manually using #sudo hostapd /var/run/wlan04.cfg but I get error as hostapd: /usr/lib/aarch64-linux-gnu/libssl.so.1.0.0: no version information available (required by hostapd) hostapd: /usr/lib/aarch64-linux-gnu/libssl.so.1.0.0: no version information available (required by hostapd) hostapd: /usr/lib/aarch64-linux-gnu/libcrypto.so.1.0.0: no version information available (required by hostapd) Configuration file: /var/run/hostapd/wlan04.cfg wlan04: interface state UNINITIALIZED->COUNTRY_UPDATE ACS: Automatic channel selection started, this may take a bit wlan04: interface state COUNTRY_UPDATE->ACS wlan04: ACS-STARTED ACS: Unable to collect survey data ACS: All study options have failed Interface initialization failed wlan04: interface state ACS->DISABLED wlan04: AP-DISABLED ACS: Possibly channel configuration is invalid, please report this along with your config file. ACS: Failed to start wlan04: AP-DISABLED hostapd_free_hapd_data: Interface wlan04 wasn’t started wlan04: interface state DISABLED->DISABLED hostapd_free_hapd_data: Interface wlan04 wasn’t started **hostapd.conf** Hostapd configuration for wlan4 interface=wlan04 driver=nl80211 logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=4 country_code=US ieee80211d=1 ssid=testSSID0 channel=0 hw_mode=a ieee80211w=0 macaddr_acl=0 ap_isolate=1 auth_algs=1 tx_queue_data3_aifs=7 tx_queue_data3_cwmin=15 tx_queue_data3_cwmax=1023 tx_queue_data3_burst=0 tx_queue_data2_aifs=3 tx_queue_data2_cwmin=15 tx_queue_data2_cwmax=63 tx_queue_data2_burst=0 tx_queue_data1_aifs=1 tx_queue_data1_cwmin=7 tx_queue_data1_cwmax=15 tx_queue_data1_burst=3.0 tx_queue_data0_aifs=1 tx_queue_data0_cwmin=3 tx_queue_data0_cwmax=7 tx_queue_data0_burst=1.5 wmm_ac_bk_cwmin=4 wmm_ac_bk_cwmax=10 wmm_ac_bk_aifs=7 wmm_ac_bk_txop_limit=0 wmm_ac_bk_acm=0 wmm_ac_be_aifs=3 wmm_ac_be_cwmin=4 wmm_ac_be_cwmax=10 wmm_ac_be_txop_limit=0 wmm_ac_be_acm=0 wmm_ac_vi_aifs=2 wmm_ac_vi_cwmin=3 wmm_ac_vi_cwmax=4 wmm_ac_vi_txop_limit=94 wmm_ac_vi_acm=0 wmm_ac_vo_aifs=2 wmm_ac_vo_cwmin=2 wmm_ac_vo_cwmax=3 wmm_ac_vo_txop_limit=47 wmm_ac_vo_acm=0