I am missing a CLI option to attach a source route to a vti interface like it is possible for other interfaces.
Ethernet:
hsychla@srt01# set interfaces ethernet eth1 policy route
Possible completions:
<text> IPv4 policy route ruleset for interface
VTI:
hsychla@srt01# set interfaces vti vti1
Possible completions:
+ address IP address
description Description
disable Disable interface
> firewall Firewall options
> ip IPv4 routing parameters
> ipv6 IPv6 routing parameters
mtu Maximum Transmission Unit (MTU)
redirect Incoming packet redirection destination
> traffic-policy
Traffic-policy for interface
According to @dmbaturin this might be an oversight rather than intentional.
Can somebody confirm?
~~And is there a possible workaround like adding manual `iptables` rules?~~ ==> yes, add what you need to `/config/scripts/vyatta-postconfig-bootup.script`