Page MenuHomeVyOS Platform

PPPoE doesn't not rename pppX to pppoeX
Closed, ResolvedPublicBUG


We must add ifname pppoeX to /etc/ppp/peers/pppoeX for interfaces renaming in equuleus, otherwise interface won't renamed.

vyos@R3# run show configuration commands | match pppoe
set interfaces ethernet eth1 pppoe 1 default-route 'none'
set interfaces ethernet eth1 pppoe 1 password 'vyos'
set interfaces ethernet eth1 pppoe 1 user-id 'vyos'

vyos@R3# sudo ip link show dev ppp1
18: ppp1: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1492 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 3


Difficulty level
Easy (less than an hour)
VyOS 1.3-rolling-201912020242
Why the issue appeared?
Will be filled on close
Is it a breaking change?
Unspecified (possibly destroys the router)

Event Timeline

Dmitry created this task.Dec 2 2019, 1:42 PM
Dmitry changed the task status from Open to Needs testing.Dec 2 2019, 2:01 PM
c-po added a subscriber: c-po.Dec 2 2019, 7:51 PM

Works as expected. Now I can use VyOS 1.3 on my PPPoE link(s)

c-po closed this task as Resolved.Dec 2 2019, 7:51 PM
c-po assigned this task to Dmitry.
c-po moved this task from Need Triage to Finished on the VyOS 1.3 Equuleus board.