Unable to add an IPv6 EUI64 address in VyOS 1.3.0-rc6 This worked previously in 1.3-rolling-202008301444. To reproduce:
set interfaces ethernet eth0 ipv6 address eui64 2001:db8::/64 (doesn't matter what prefix is used)
commit
Report Time: 2021-08-25 03:18:56
Image Version: VyOS 1.3.0-rc6
Release Train: equuleus
Built by: Sentrium S.L.
Built on: Sun 22 Aug 2021 15:37 UTC
Build UUID: 965518de-857d-4e61-ab09-381aadf24eb1
Build Commit ID: 75b37b28b2e9ab
Architecture: x86_64
Boot via: installed image
System type: KVM guest
Hardware vendor: Red Hat
Hardware model: KVM
Hardware S/N:
Hardware UUID: 19049165-3eee-d9a7-5f70-b5c0bdb37149
Traceback (most recent call last):
File "/usr/libexec/vyos/conf_mode/interfaces-ethernet.py", line 151, in <module> apply(c) File "/usr/libexec/vyos/conf_mode/interfaces-ethernet.py", line 140, in apply e.update(ethernet) File "/usr/lib/python3/dist-packages/vyos/ifconfig/ethernet.py", line 376, in update super().update(config) File "/usr/lib/python3/dist-packages/vyos/ifconfig/interface.py", line 1259, in update self.del_ipv6_eui64_address(addr) File "/usr/lib/python3/dist-packages/vyos/ifconfig/interface.py", line 592, in del_ipv6_eui64_address prefixlen = prefix.split('/')[1]
IndexError: list index out of range
noteworthy:
cmd 'ethtool --show-pause eth0'
returned (out):
Pause parameters for eth0:
returned (err):
Cannot get device pause settings: Operation not supported
cmd 'ethtool -K eth0 lro off'
returned (out):
returned (err):
Cannot change large-receive-offload
cmd 'ethtool -K eth0 ufo off'
returned (out):
returned (err):
Cannot change udp-fragmentation-offload
interfaces ethernet eth0 failed
Commit failed