In T6258#184875, @Viacheslav wrote:This sysctl option is deprecated
DEPRECATED PARAMETERS top The base_reachable_time and retrans_time are deprecated. The sysctl command does not allow changing values of these parameters. Users who insist to use deprecated kernel interfaces should push values to /proc file system by other means. For example: echo 256 > /proc/sys/net/ipv6/neigh/eth0/base_reachable_timeI propose to add new option under interface
set interfaces ethernet eth1 ip[v6] base-reachable-time xxx
- Queries
- All Stories
- Search
- Advanced Search
- Transactions
- Transaction Logs
Feed Advanced Search
Advanced Search
Advanced Search
Thu, Apr 25
Thu, Apr 25
Hi everyone, I think I found the simplest configuration that can reproduce this problem. If we set up firewall and use this command(set system sysctl parameter net.ipv6.neigh.eth3/2) in configuration at the same time, an error message will show when startup.
This is an example
set firewall set interfaces ethernet eth0 address 'xxx.xxx.184.32/24' set interfaces ethernet eth0 hw-id 'xx:xx:xx:xx:xx:50' set interfaces ethernet eth1 hw-id 'xx:xx:xx:xx:xx:ba' set interfaces ethernet eth1 vif 2 set interfaces loopback lo set protocols static route xxx.xxx.0.0/0 next-hop xxx.xxx.184.1 set service ntp allow-client xxxxxx 'xxx.xxx.0.0/0' set service ntp allow-client xxxxxx '::/0' set service ntp server xxxxx.tld set service ntp server xxxxx.tld set service ntp server xxxxx.tld set service ssh set system config-management commit-revisions '100' set system conntrack modules ftp set system conntrack modules h323 set system conntrack modules nfs set system conntrack modules pptp set system conntrack modules sip set system conntrack modules sqlnet set system conntrack modules tftp set system console device ttyS0 speed '115200' set system host-name xxxxxx set system login user xxxxxx authentication encrypted-password xxxxxx set system sysctl parameter net.ipv6.neigh.eth1/2.base_reachable_time_ms value '14400000' set system syslog global facility all level 'info' set system syslog global facility local7 level 'debug'
If delete the first line (set firewall), system will start normally without error message.