@emartel wrote:
Can you point me to a valid L2TPv3 over IPSEC configuration where one of the sites is using a Dynamic IP address?
I don't know how to configure the "set interfaces l2tpv3 l2tpeth0 local-ip X.X.X.X". The command is mandatory and does not accept "any" like the IPSEC config does.
FYI: I configured the IPSEC as follows:
```
site-to-site {
peer 192.168.2.22 {
authentication {
id @lanino
mode pre-shared-secret
pre-shared-secret ****************
}
connection-type initiate
ike-group IKE-1
ikev2-reauth inherit
local-address any
tunnel 1 {
allow-nat-networks disable
allow-public-networks disable
esp-group ESP-1
local {
}
protocol 115
remote {
}
}
}
```