It appears that default APv6 route is not created ib VRF. Here si the configuration:
```
vyos01# show protocols vrf MGMT-TOR1
static {
route 0.0.0.0/0 {
next-hop 192.168.1.1 {
}
}
route6 ::/0 {
next-hop 2620:18:6000:aa10::1 {
}
}
}
[edit]
```
the IPv4 route is created as expected:
```
vyos01# run show ip route vrf MGMT-TOR1
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued route, r - rejected route
VRF MGMT-TOR1:
S>* 0.0.0.0/0 [1/0] via 192.168.1.1, eth0, 03:46:01
K 0.0.0.0/0 [255/8192] unreachable (ICMP unreachable), 03:49:26
C>* 192.168.1.0/24 is directly connected, eth0, 03:49:26
```
however, IPv6 route is missing
```
@vyos01# run show ipv6 route vrf MGMT-TOR1
Codes: K - kernel route, C - connected, S - static, R - RIPng,
O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table,
v - VNC, V - VNC-Direct, A - Babel, D - SHARP, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued route, r - rejected route
VRF MGMT-TOR1:
K ::/0 [255/8192] unreachable (ICMP unreachable), 03:49:14
C>* fe80::/64 is directly connected, eth0, 03:49:12
```