Hello,
Could you add the vlan option into Accel?
With this option we dont need to configure VLANs manually into Vyos, Accel by itself will create the desired VLANS if they reach the server.
The [pppoe] section working at /etc/accel-ppp/pppoe/pppoe.config is:
```
[pppoe]
verbose=3
vlan-mon=eth0,300-400
vlan-timeout=60
vlan-name=%I.%N
interface=eth0
interface=re:eth0\.([1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
```
Where:
vlan-mon=interface,vlan ID range
vlan-timeout=XX in seconds
vlan-name:
%I = name of patern interface
%N = VLAN number
interface=re:em1\.([1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]) This is to make Accel work on the configured VLANS.
I think this could be added in the
```
set service pppoe-server interface vlan enable
set service pppoe-server interface vlan ID or VLAN-RANGE
```