User Details
- User Since
- May 18 2016, 7:59 PM (414 w, 1 d)
Dec 2 2020
Cool let me know if you still need my config
It looks like the issue is CDP. If I remove the CDP piece of the config then it works.
I just upgraded to the absolute latest rolling release that came out early this morning and it has the same issue.
I just tried the show lldp neighbors again and it doesn't work but sudo lldpcli show neighbors works
mlaney@vyos:~$ sudo lldpcli show neighbors
LLDP neighbors:
Interface: eth1, via: CDPv2, RID: 1, Time: 0 day, 08:19:01
Chassis: ChassisID: local Cisco-Sw1.local SysName: Cisco-Sw1.local SysDescr: cisco WS-C2960S-48LPS-L running on Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.2(2)E9, RELEASE SOFTWARE (fc4) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2018 by Cisco Systems, Inc. Compiled Sat 08-Sep-18 14:56 by prod_rel_team MgmtIP: 10.22.87.254 Capability: Bridge, on Port: PortID: ifname GigabitEthernet1/0/9 PortDescr: GigabitEthernet1/0/9 TTL: 180
Interface: eth1, via: CDPv2, RID: 1, Time: 0 day, 08:18:47
Chassis: ChassisID: local Cisco-Sw1.local SysName: Cisco-Sw1.local SysDescr: cisco WS-C2960S-48LPS-L running on Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.2(2)E9, RELEASE SOFTWARE (fc4) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2018 by Cisco Systems, Inc. Compiled Sat 08-Sep-18 14:56 by prod_rel_team
Here is my lldp config. ETH0 is WAN ETH1 is lan that is why only eth1 has lldp enabled.
Aug 3 2020
1.3-rolling-202008031923 Fixes this issue this can be closed. Thanks @c-po
This is the same issue as T2740
I tried the latest version 1.3-rolling-202008030118 and now I get an address on the outside interface but it doesn't delegate the prefix to the lan interface.