Maybe the related bug described in T4737
Could you show a version of FRR?
show version all | match frr
Maybe the related bug described in T4737
Could you show a version of FRR?
show version all | match frr
A patch to the WIDE DHCPv6 client seems to be sufficient to resolve this issue with respect to the way VyOS currently uses the daemon (one daemon per configured interface), PRs below:
I am suggesting marking this task as "Resolved" because the driver works by himself and NIC can be used with a proper configuration.
As @zsdc says, it's not enough to just have the driver, the problem is that it doesn't work with MTUs over 1460, and VyOS now tries to force it to 1500 if it's not specified. We need to adjust that logic so that MTU setting error doesn't cause a commit error.
vyos@vyos:~$ sudo bridge -c vlan show port vlan-id eth0 10 20 eth1 10 20 br0 1 PVID Egress Untagged
I have confirmed that this issue is now resolved when building from equuleus. I've attached a screenshot showing the table for the dynamic interface has a default route after the interface get's an IP. I used the following commands to build the ISO.
PR for 1.3.2 https://github.com/vyos/vyatta-cfg-qos/pull/16