I will try the latest
- Queries
- All Stories
- Search
- Advanced Search
- Transactions
- Transaction Logs
All Stories
Mar 1 2021
Yes, sure. It will work only if one vlan-id defined, e.g. if you configure a couple vlan-id you will get wrong syntax"
set service pppoe-server interface eth1 vlan-id '50' set service pppoe-server interface eth1 vlan-id '60'
In generated config
vlan-mon=eth1,50,60 interface=eth1.50,60
Expected:
vlan-mon=eth1,50,60 interface=eth1.50 interface=eth1.60
PR https://github.com/vyos/vyos-1x/pull/755
@Dmitry Can you check/review PR?
Feb 28 2021
Good job! I think there exists one remark. If we set set service pppoe-server interface eth1 vlan-id '50' that means you want to listen to pppoe client on eth1.50, but in config you have
vlan-mon=eth1,50 interface=re:eth1\.\d+
e.g. eth1\.\d+ mean all vlans in eth1, even eth1.50.50.50 will fit for this regular expression
I propose do not to use a regular expression for vlan-id, as an example:
- set service pppoe-server interface eth1 vlan-id '50'
vlan-mon=eth1,50 interface=eth1.50
Yes, agree it works by show interfaces vrrp, but behavior in 1.2.x also displayed VIP by command show interfaces
I think this is a bug and need to fix it.
You can use <x.x.x.x>-<x.x.x.x>
Or you need "multi" addresses not in "range"? Something like
set nat destination rule 5 translation member 203.0.113.1 set nat destination rule 5 translation member 203.0.113.14 set nat destination rule 5 translation member 203.0.113.240
Temporary workaround for the VyOS 1.3-rc1 users:
I agree we should just check if it starts with a letter and doesn't include characters that an FQDN cannot have.
Feb 27 2021
Backport is complete - It will "work" once the 1.3 kernel is updated to 5.10 series
A work-around for this was added in 1.2.6 and I verified it's working in 1.3.0-rc1
Just chiming back in to let you guys know I installed the latest vyos rolling release after all this time and the issue seems to have been fixed!
@craterman Thanks.
@Viacheslav, tested on VyOS 1.3-beta-202102270443. It works
Node "protocols" in 1.4 also doesn't have a description
This is not applicable to VyOS 1.4 because of T3364.
PR https://github.com/vyos/vyos-1x/pull/753
Additional checks for "neighbor interface" configuration.
But only vrrp works
The neighbor can contain a string
set protocols bgp 64501 neighbor eth1 set protocols bgp 64501 neighbor eth1 remote-as 65001
Feb 26 2021
Something wrong with that check https://github.com/vyos/vyos-1x/blob/8732ebc46a2daddc6e4dfa05f3f70bf2ac9400af/src/conf_mode/protocols_bgp.py#L170-L171
Fail
set protocols bgp 64501 neighbor 203.0.113.1 remote-as 65001 set protocols bgp 64501 neighbor 203.0.113.1 peer-group FOO set protocols bgp 64501 peer-group FOO