PR for 1.3-rolling https://github.com/vyos/vyos-1x/pull/228
- Queries
- All Stories
- Search
- Advanced Search
- Transactions
- Transaction Logs
All Stories
Feb 24 2020
FWIW, this issue is still occuring on 1.3 rolling (1.3-rolling-202002180217) for interfaces with DHCP set. While the above referenced repository is archived, the script here https://github.com/vyos/vyos-vmwaretools-scripts/blob/current/scripts/resume-vm-default.d/ether-resume.py seems to be the latest version.
For any interface with DHCP enabled, it will try to run
ip address add dhcp dev ethX
Since dhcp is not a valid address this fails and after the interface loses it's IP until dhclient is run manually or the system reboots. The script linked by @dmaasland works correctly.
The patch is ready for inclusion.
This work raised an issue with the current pattern of using Interface(..).remove() which is used in VLANIf as it requires Interface to know that EthernetIf can not be deleted (an implementation detail which should remain in EthernetIf).
@hagbard thanks, works as expected. I think this might be backport candidate to 1.2.X
https://github.com/vyos/vyos-1x/commit/d9fa3fb7d7613cd5d6297115da0dc63462d4cf69
@Dmitry next rolling will have it enabled, let me know if it works for you as intended.
Feb 23 2020
This is the bottom of the config that fails the upgrade
Hi, That wasn't the problem. I did remove some of the config. I must have left a bit.
removing the check makes it work like a charme push request incomming..
On first glance this looks to me like zone policy issue.
A fix for this is available in the latest rolling release
run into the same. If I add parameters default 'no-ipv4-unicast' to my config and commit I get the waring above. All runs fine, cause the sessions where already configured before.
If I do a reboot, bgp config in frr is neartly empty only "router bgp 64512" was there not more. Removing it and do an commit nothing changed. Removing it an reboot helped.
Feb 22 2020
Feb 21 2020
Pull Request: https://github.com/vyos/ppp-upstream/pull/2
Feb 20 2020
I send a pull request to fix it:
This work overtakes T2046, as it implements the same _create/_delete interface. If merged it would replace it.
It's an upstream bug as @xrobau said. vyos dev sould upgrade https://github.com/vyos/conntrack-tools repo, and apply this patch:
https://git.netfilter.org/conntrack-tools/commit/?id=c12fa8df76752b0a011430f069677b52e4dad164
In T2036#53376, @c-po wrote:Hello @dongjunbo what are the benefits of ocserv over the other VPN Solutions already in place?
- WireGuard
- OpenVPN
- L2TP/IPSec
- PPTP
- SSTP
- IKEv2 road warrior (not yet implemented, only site2site)
I tested vyos-1.3-rolling-202002200217-amd64.iso
It works now.
Thanks for help!
Feb 19 2020
It would be useful if someone could do similar tests using GNS3 in a powerful computer.
This is dependent on T2029, PR 224, and should only be merged after that PR.
This is dependent on T2029, PR 224, and should only be merged after that PR.
Auto completion should be done on a per CLI path:
In T1838#50692, @syncer wrote:@Dmitry and i talked that it will be wise to move ipt-netflow for better performance