This is dependent on T1260, which will need to be backported.
Feed All Stories
Nov 19 2019
Nov 19 2019
jestabro moved T1772: <regex> constraints in XML are partially broken from Backlog to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
jestabro moved T1694: NTPd: Do not listen on all interfaces by default from Backlog to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
jestabro edited projects for T1747: L2TP breaks after upgrading to VyOS 1.2-rolling-201910180117 [issue report and proposed solution], added: VyOS 1.2 Crux (VyOS 1.2.5); removed VyOS 1.2 Crux (VyOS 1.2.4).
dmbaturin removed a project from T1260: VICI-based implementation of "run show vpn ipsec sa": VyOS 1.2 Crux (VyOS 1.2.1).
jestabro moved T1678: hostfile-update missing line feed from Backlog to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
jestabro moved T1701: Delete domain-name and domain-search won't work from Backlog to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
jestabro added a comment to T1755: Python KeyError exceptions raised with 'show vpn ipsec sa' command under use of certain IPSEC cipher suites.
jestabro added a comment to T1260: VICI-based implementation of "run show vpn ipsec sa".
This never made it into VyOS 1.2.1, so it will need to be backported to Crux, either 1.2.4 or 1.2.5, depending on schedule.
hexes added a comment to T1757: ISO issue, login/pass, VirtualBox / HW.
hello @c-po , thanks a lot for reply!
"Different way" - you mean if [ "$1" = "configure" ];? "Same way" - I mean addgroup / adduser commands...
jestabro moved T1593: Support ip6gre from Backlog to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
jestabro edited projects for T1452: accel-pppoe - add vendor option to shaper , added: VyOS 1.2 Crux (VyOS 1.2.5); removed VyOS 1.2 Crux (VyOS 1.2.4).
This will need several related commits, testing, before being backported.
jestabro moved T1391: In route-map set community additive from Backlog to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
jestabro edited projects for T1622: Add failsafe and back trace to boot config loader, added: VyOS 1.2 Crux (VyOS 1.2.5); removed VyOS 1.2 Crux (VyOS 1.2.4).
jestabro moved T1597: /usr/sbin/rsyslogd after deleting "system syslog" from Backlog to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
trae32566 reopened T1714: Disable DHCP Nameservers Not Working as "Open".
Hey, the deleted comment I made above was incorrect, this works on 1.2 rolling, it is still broken on 1.3. Sorry for the confusion.
Unknown Object (User) added a comment to T1812: DHCP: hostnames of clients not resolving after update v1.2.3 -> 1.2-rolling .
Need run increment first.
jjakob added a comment to T1376: Incorrect DHCP lease counting.
Crux needs a backport of show_dhcp.py from current, I fixed this in current
dongjunbo added a comment to T1376: Incorrect DHCP lease counting.
Seem like static counting still not right
@dongjunbo, show please the configuration of this router so we could check why gcdomestic pool does not count correctly.
dongjunbo reopened T1376: Incorrect DHCP lease counting, a subtask of T1470: improve output of "show dhcpv6 server leases", as Open.
dongjunbo reopened T1376: Incorrect DHCP lease counting as "Open".
Dear， Developers
Seem like the bug still there in vyos 1.2.3 release version
trae32566 added a comment to T1714: Disable DHCP Nameservers Not Working.
Nov 18 2019
Nov 18 2019
kroy changed the status of T1812: DHCP: hostnames of clients not resolving after update v1.2.3 -> 1.2-rolling from Open to Needs testing.
kroy added a comment to T1812: DHCP: hostnames of clients not resolving after update v1.2.3 -> 1.2-rolling .
PR166 should fix this.
jestabro closed T1801: Unescaped backslashes in config values cause configuration failure as Resolved.
c-po moved T1811: Upgrade from 1.1.8: Config file migration failed: module=l2tp from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
c-po moved T1811: Upgrade from 1.1.8: Config file migration failed: module=l2tp from In Progress to Finished on the VyOS 1.3 Equuleus board.
c-po added a comment to T1811: Upgrade from 1.1.8: Config file migration failed: module=l2tp.
backported to 1.2.4
c-po edited projects for T1811: Upgrade from 1.1.8: Config file migration failed: module=l2tp, added: VyOS 1.2 Crux (VyOS 1.2.4); removed VyOS 1.2 Crux (VyOS 1.2.5).
c-po updated the task description for T1627: Rewrite wireless interface in new style XML syntax.
syncer triaged T1811: Upgrade from 1.1.8: Config file migration failed: module=l2tp as Normal priority.
syncer moved T1811: Upgrade from 1.1.8: Config file migration failed: module=l2tp from Need Triage to In Progress on the VyOS 1.3 Equuleus board.
syncer edited projects for T1811: Upgrade from 1.1.8: Config file migration failed: module=l2tp, added: VyOS 1.3 Equuleus, VyOS 1.2 Crux (VyOS 1.2.5); removed VyOS 1.2 Crux.
Unknown Object (User) changed the status of T1811: Upgrade from 1.1.8: Config file migration failed: module=l2tp from Open to In progress.
Added additional check before cycle.
c-po added a comment to T1627: Rewrite wireless interface in new style XML syntax.
Commands used for testing on VyOS 1.2.3 (also tests the config migration):
jestabro added a parent task for T1814: Add log of migration scripts run during config migration: T1397: Rewrite the config merge script.
jestabro changed the status of T1814: Add log of migration scripts run during config migration from Open to In progress.
syncer assigned T1811: Upgrade from 1.1.8: Config file migration failed: module=l2tp to Unknown Object (User).
trae32566 added a comment to T1714: Disable DHCP Nameservers Not Working.
It looks like the domain and search are now working (and not showing the DHCP one as expected, so that is fixed too), but the DHCP nameservers are still there:
Nov 17 2019
Nov 17 2019
dmbaturin added a comment to T548: BGP IPv6 multipath support.
Frankly, I can see why FRR doesn't want it to be modifiable at runtime. If you are decreasing the number, it would force a big routing table rebuild, and tracking whether the user increased or decreased it to decide if command should be allowed or not is more trouble than it's worth.
c-po added a comment to T548: BGP IPv6 multipath support.
It may be supported but the syntax in the Pull-request is wrong and does not work for FRR, it needs to be adjusted.
c-po added a comment to T1714: Disable DHCP Nameservers Not Working.
I just updated the equuleus branches. Please test tomorrows rolling release as it should have the fixes.
trae32566 added a comment to T1714: Disable DHCP Nameservers Not Working.
So just an update, this issue is still present on more recent VyOS 1.3:
trae32566 added a comment to T1715: System DNS Server Order Incorrect.
It looks like this is indeed fixed now!
trae32566 added a comment to T1183: BFD Support via FRR.
Just a note, I updated my docs above cause they were missing the OSPF+OSPFv3 portion of the interface config that enabled BFD :)
dmbaturin added a comment to T1430: Add options for custom DHCP client-id and hostname.
The original client-id has been cherry-picked into crux, but the vendor-class commands are not backportable since they rely on the new interface scripts.
dmbaturin closed T1376: Incorrect DHCP lease counting, a subtask of T1470: improve output of "show dhcpv6 server leases", as Resolved.
dmbaturin added a parent task for T1376: Incorrect DHCP lease counting: T1470: improve output of "show dhcpv6 server leases".
dmbaturin renamed T1376: Incorrect DHCP lease counting from Change dhcp lease couting funcition to Incorrect DHCP lease counting.
Also in crux now.
Cherr-picked into crux.
c-po moved T1792: Update WireGuard to Debian release 0.0.20191012-1 from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
c-po added a project to T1792: Update WireGuard to Debian release 0.0.20191012-1: VyOS 1.2 Crux (VyOS 1.2.4).
c-po moved T1800: Update Linux Kernel to v4.19.84 from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
syncer reassigned T366: SNMP Query for BGP Tunnels Returns IPv4 Tunnels Only from c-po to Unknown Object (User).
c-po renamed T1809: Wireless: SSID scan does not work in AP mode from Wireless: SSID scan doe not work in AP mode to Wireless: SSID scan does not work in AP mode.
c-po moved T1809: Wireless: SSID scan does not work in AP mode from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
c-po moved T1809: Wireless: SSID scan does not work in AP mode from Need Triage to VyOS 1.2.4 on the VyOS 1.2 Crux board.
jjakob added a comment to T1787: Failed config migration from V1.2.3 to 1.2-rolling-201911030217.
This is related/a duplicate of T1744
jjakob added a comment to T1744: Config load fails in ConfigTree with ValueError: Failed to parse config: lexing: empty token.
The replacement of special characters with backslash decimal happened on upgrade from 1.2.0-rc11 to 1.2.0-rolling+201906231514.
syncer closed T1421: OpenVPN client push-route stopped working, needs added quotes to fix as Resolved.
syncer moved T1578: completion offers "show table", but show table does not exist from Need Triage to Finished on the VyOS 1.3 Equuleus board.
syncer moved T1742: NHRP unable to commit. from Need Triage to Finished on the VyOS 1.3 Equuleus board.
syncer moved T1394: syslog systemd and host_name.py race condition from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
syncer moved T1447: Python subprocess called without import in host_name.py from Needs Triage to Finished on the VyOS 1.2 Crux (VyOS 1.2.4) board.
syncer edited projects for T1629: IP addresses configured on vif-s interfaces are not added to the system, added: VyOS 1.2 Crux (VyOS 1.2.5); removed VyOS 1.2 Crux (VyOS 1.2.4).
syncer edited projects for T1350: VRRP transition script will be executed once only, added: VyOS 1.2 Crux (VyOS 1.2.5); removed VyOS 1.2 Crux (VyOS 1.2.4).