Page MenuHomePhabricator

Merijn (Merijn)
User

Projects

User does not belong to any projects.

User Details

User Since
May 13 2016, 10:32 PM (144 w, 5 d)

Recent Activity

Thu, Feb 14

Merijn added a comment to T1218: Static routes not being applied in 1.2 Release.

@kroy by using chroot and trying to install the vyatta-cfg-quagga package i found out what is causing my build iso error:

Thu, Feb 14, 10:57 AM · VyOS 1.2 Crux (VyOS 1.2.1)
Merijn added a comment to T1218: Static routes not being applied in 1.2 Release.

@Maltahl just re-tested this, with the staticd=yes added, and a reboot done.
When i add two static routes i would expect the /24 route to work because it is more specific. But is does not and show ip route shows only the /23 blackhole.

Thu, Feb 14, 10:38 AM · VyOS 1.2 Crux (VyOS 1.2.1)
Merijn added a comment to T1218: Static routes not being applied in 1.2 Release.

@Maltahl for me it was not fixed with that addition, and i read above that others had this as well.

Thu, Feb 14, 9:19 AM · VyOS 1.2 Crux (VyOS 1.2.1)

Wed, Feb 13

Merijn added a comment to T1218: Static routes not being applied in 1.2 Release.

@kroy everything is at current, except 'frr' because then i get 7.1dev and i would like 6.0.2 to test if this solved it.
I used debian/master branch from FRR.

Wed, Feb 13, 8:38 AM · VyOS 1.2 Crux (VyOS 1.2.1)

Tue, Feb 12

Merijn added a comment to T1218: Static routes not being applied in 1.2 Release.

I am experiencing the same issues with a router i tested with 1.2.0 current.
Can we create a test release going back to FRR 6.0.2?

Tue, Feb 12, 11:14 PM · VyOS 1.2 Crux (VyOS 1.2.1)

Fri, Feb 8

Merijn added a comment to T1148: epa2 BGP peers initiate before config is fully loaded, routes leak..

@zsdc i meant test with 1.2.0 :-)

Fri, Feb 8, 12:11 PM · VyOS 1.2 Crux (VyOS 1.2.2)
Merijn added a comment to T1148: epa2 BGP peers initiate before config is fully loaded, routes leak..

We are seeing this issue mostly on BGP routers with Internet Exchange connections because at a reboot we are hitting max-prefix limits with a lot of peers.
At this moment it is not possible to upgrade to latest 1.2.0, still running 1.1.8.

Fri, Feb 8, 8:06 AM · VyOS 1.2 Crux (VyOS 1.2.2)

Tue, Jan 29

Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

@hagbard Did you merge the second PR also? For vyos/vyatta-nat?

Tue, Jan 29, 11:12 PM · VyOS 1.3 Equuleus
Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

@hagbard created an iso image and loaded it in a VM. I can add the configuration and at commit the right ip6tables rules are created.

Tue, Jan 29, 8:53 PM · VyOS 1.3 Equuleus
Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

@hagbard the changes are created with the patch files mentioned earlier.
I am in the process of creating packages and an iso with it.

Tue, Jan 29, 7:56 PM · VyOS 1.3 Equuleus
Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

@hagbard PRs created, first time so hope its done right.

Tue, Jan 29, 1:55 PM · VyOS 1.3 Equuleus

Thu, Jan 24

Merijn added a comment to T1185: Firewall rulesets are ignored in RFC-compliant VRRP setups.

@jmlccdmd
I added a second router and configured conntrack-sync.
Failover and preempt failback works correct.
Both routers show statistics for the firewall rules

Thu, Jan 24, 9:50 PM · VyOS 1.2 Crux (VyOS 1.2.2)

Tue, Jan 22

Merijn added a comment to T1185: Firewall rulesets are ignored in RFC-compliant VRRP setups.

But if you run only on the first router, including the VRRP setup it does not work?

Tue, Jan 22, 7:39 PM · VyOS 1.2 Crux (VyOS 1.2.2)

Jan 21 2019

Merijn added a comment to T1185: Firewall rulesets are ignored in RFC-compliant VRRP setups.

@jmlccdmd
I have recreated your setup with Vyos 1.2.0-rc10 and it seems to be working correctly

Jan 21 2019, 9:37 AM · VyOS 1.2 Crux (VyOS 1.2.2)

Jan 19 2019

Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

After some searching i found that with the following commands it works:

Jan 19 2019, 10:53 PM · VyOS 1.3 Equuleus
Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

@hagbard
Test setup created

Jan 19 2019, 10:25 PM · VyOS 1.3 Equuleus

Jan 16 2019

Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

I can probably create a test setup this week and test the normal implementation in NPTv6 te see what is not working in my production setups.
As i do not have a build server at this moment creating a PR would be a bit difficult, the patch files are included in the comments above.

Jan 16 2019, 8:22 AM · VyOS 1.3 Equuleus

Jan 15 2019

Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

Then we do not have the same setup :-)
set interfaces ethernet eth0 address 'x.x.x.225/24'
set interfaces ethernet eth0 address 'x:x:x:x::225/64'
set interfaces ethernet eth1 address '10.0.201.1/24'
set interfaces ethernet eth1 address 'fd00:10:0:201::1/64'
set nat nptv6 rule 10 outbound-interface 'eth0'
set nat nptv6 rule 10 source prefix 'fd00:10:0:201::/64'
set nat nptv6 rule 10 translation prefix 'x:x:x:x::/64'
set protocols static route 0.0.0.0/0 next-hop x.x.x.1
set protocols static route6 ::/0 next-hop x:x:x:x::1

Jan 15 2019, 10:36 PM · VyOS 1.3 Equuleus
Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

@hagbard What do you want me to try. I downloaded and loaded that rolling image and i do not see the proposed patches in it.
I rebooted the router and it did not work.

Jan 15 2019, 9:55 PM · VyOS 1.3 Equuleus

Jan 14 2019

Merijn added a comment to T1176: FRR - BGP replicating routes.

According to FRR this is normal behavior.
https://github.com/FRRouting/frr/pull/3044

Jan 14 2019, 9:22 AM

Jan 6 2019

Merijn added a comment to T1157: Static route not reachable through VRRP address.

Do you mean the 31 and 32 also couldn’t ping eachother?

Jan 6 2019, 10:06 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-GA)

Jan 5 2019

Merijn added a comment to T1035: SNMP BGP 32 bit AS number fail.

https://www.shrubbery.net/mibs/BGP4-MIB.txt
We can start with this like @rherold suggests since FRR supports BGP4 MIB.

Jan 5 2019, 10:23 AM · VyOS 1.3 Equuleus
Merijn added a comment to T1035: SNMP BGP 32 bit AS number fail.

Seems duplicate with https://phabricator.vyos.net/T366
If we use the Cisco BGP MIBv2 we solve both issues.

Jan 5 2019, 12:06 AM · VyOS 1.3 Equuleus

Jan 4 2019

Merijn added a comment to T1157: Static route not reachable through VRRP address.

I see in the config that you do not have an interface IP on the VRRP members.
This works in 1.1.8 most of the time. But can you test if 1.2.0 works with those added. The hello source address is not needed then and the chances are the kernel wil load the connected route this way.

Jan 4 2019, 11:51 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-GA)

Jan 2 2019

Merijn added a comment to T1149: flow-accounting stops on 1.2.0-epa2.

Solved by disabling engine ID when the version is 9, not sure if this is enough but on my router it works.

Jan 2 2019, 10:07 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
Merijn added a comment to T1149: flow-accounting stops on 1.2.0-epa2.

Until version 1.7.0 it was possible to (mistakenly) configure the
NetFlow v9 SourceID field/IPFIX Observation Domain ID with the old
NetFlow v5 jargon, ie. '1:1'. This is now threated as invalid and
a positive 32-bit number, ie. '100000', is expected. If exporting
NetFlow v5, nothing changed: the Engine ID/Engine Type input, ie.
'1:1', is still valid and expected.

Jan 2 2019, 9:44 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
Merijn created T1149: flow-accounting stops on 1.2.0-epa2.
Jan 2 2019, 9:42 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
Merijn added a comment to T1148: epa2 BGP peers initiate before config is fully loaded, routes leak..

This behavior was already present in the old Quagga implementation in Vyos 1.1.7.
As a workaround we always shutdown the peers when doing a planned reboot.

Jan 2 2019, 8:21 PM · VyOS 1.2 Crux (VyOS 1.2.2)

Dec 31 2018

Merijn added a comment to T1112: BGP redistribute static not migrated on upgrade.

Hi, yeah i was planning on adding it later. Thanks.

Dec 31 2018, 12:26 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)

Dec 30 2018

Merijn added a comment to T1133: Confusing commit error message for non-existent VRRP sync-groups used in conntrack sync.

@dmbaturin I believe you forgot to create the Sync-Group. The following configuration is working, and it is really nice to see how this got created during migration from Vyos 1.1.8, and to finally have IPv6 in the VRRP configuration.

Dec 30 2018, 9:31 AM · VyOS-1.2.0-GA, vyatta-vrrp, conntrack-tools

Dec 24 2018

Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

One extra patch needed

Dec 24 2018, 1:58 PM · VyOS 1.3 Equuleus
Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

SInce this is a 1-to-1 mapping it also opens up all incoming ports to the hosts behind the router.

Dec 24 2018, 12:43 PM · VyOS 1.3 Equuleus

Dec 21 2018

Merijn added a comment to T1096: BGP process memory leak.

It was at 2GB because it is a test router running in the production network.
I increased memory and will check to see if this resolves it.

Dec 21 2018, 11:30 AM · VyOS 1.3 Equuleus
Merijn added a comment to T1096: BGP process memory leak.

@syncer
It is a virtual machine on Hyper-V 2016 with 2 cores, 2GB memory.
I compared the output from top over te past week and the only changes are in the uacctd processes.

Dec 21 2018, 11:25 AM · VyOS 1.3 Equuleus

Dec 17 2018

Merijn added a comment to T1112: BGP redistribute static not migrated on upgrade.

With the following patch the statements are migrated. Needs some work to also migrate the metric and route-map settings. Will try to do that later.

Dec 17 2018, 10:31 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
Merijn created T1112: BGP redistribute static not migrated on upgrade.
Dec 17 2018, 9:24 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)

Dec 12 2018

Merijn added a comment to T1095: Connection tracking NAT / FIREWALL.

The idea for 'helper ftp' is a bit harder to implement, because it seems it requires iptables -t raw and currently we only have filter and mangle.

Dec 12 2018, 10:35 PM

Dec 11 2018

Merijn added a comment to T1095: Connection tracking NAT / FIREWALL.

Since during parsing we cannot detect if it is FTP traffic or not, because you can choose whatever port you want, i think the only solution would be to add something like

Dec 11 2018, 4:13 PM
Merijn added a comment to T1095: Connection tracking NAT / FIREWALL.

Probable cause is:
https://unix.stackexchange.com/questions/385693/iptables-nf-conntrack-ftp-not-working-under-debian

Dec 11 2018, 4:09 PM
Merijn created T1096: BGP process memory leak.
Dec 11 2018, 3:53 PM · VyOS 1.3 Equuleus

Dec 4 2018

Merijn added a comment to T904: BGP process does not start a boot.

Upgrade to 1.2.0-rc10 and BGP is still working fine. It starts at boot and loads all BGP peers and several full tables.

Dec 4 2018, 10:36 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)

Nov 27 2018

Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

With some small changes i changed the scripts to create the proposed NETMAP rules when editing the NPTv6 rules in the configuration. For me this is working and surviving reboot.
I can add the diff files if anyone wants them.

Nov 27 2018, 8:38 PM · VyOS 1.3 Equuleus
Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

Re-tested with 1.2.0-rc9 with the same result.
I found that i can enable debug in /opt/vyatta/sbin/vyos-update-nptv6.pl to see what is added and deleted.

Nov 27 2018, 8:02 PM · VyOS 1.3 Equuleus

Nov 26 2018

Merijn added a comment to T977: Permission denied error when performing config rollback on a machine upgraded from VyOS 1.1.x.

This seems to be easy.
sudo chmod 776 /opt/vyatta/etc/config/archive/config.boot

Nov 26 2018, 9:49 PM · VyOS 1.2 Crux (VyOS 1.2.0-GA), VyOS-1.2.0-GA
Merijn added a comment to T977: Permission denied error when performing config rollback on a machine upgraded from VyOS 1.1.x.

Upgrade from 1.1.7 with a couple of changes in the rollback list to the current 1.2.0-rc9 also shows thi same error:
Couldn't open /opt/vyatta/etc/config/archive/config.boot - Permission denied at /opt/vyatta/share/perl5/Vyatta/ConfigMgmt.pm line 108.

Nov 26 2018, 9:46 PM · VyOS 1.2 Crux (VyOS 1.2.0-GA), VyOS-1.2.0-GA
Merijn added a comment to T904: BGP process does not start a boot.

@syncer In the 1.2.0-rc9 image this seems to be fixed. I upgraded to this release and the config is working flawlessly as far as i can tell now.
BGPD is started at boot, and no config parts are missing.
I am also running several BGP neighbors, and several of them with a full BGP table.

Nov 26 2018, 9:31 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)

Oct 18 2018

Merijn added a comment to T865: Add initial RPKI support.

You don't need this FEAT for others enforcing your ROAs. You need this FEAT to enforce received-routes on VyOS.

Oct 18 2018, 5:18 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-GA)
Merijn added a comment to T799: In the FRR image community-list is not handled correctly.

This is still a problem with vyos 1.2.0-rc2.

Oct 18 2018, 12:27 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc4)

Oct 15 2018

Merijn added a comment to T904: BGP process does not start a boot.

After a reboot now the config misses the BGP config. Loading it and trying commit shows the following:
Warning: connecting to bgpd...failed!
bgpd is not running

Oct 15 2018, 1:57 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
Merijn added a comment to T904: BGP process does not start a boot.

@c-po i saved the working complete config to a file, and when loading this after reboot with a lot missing, not a single error message is shown besides: boot-config-loader: Commit failed at boot

Oct 15 2018, 12:48 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
Merijn added a comment to T904: BGP process does not start a boot.

At that location only a couple of pre-migration configs exist. In archive subfolder also only old files exist.
But i loaded the latest pre-migration script, this causes all BGP configuration to be removed by the commit.
The error message is:
% Specify remote-as or peer-group commands first

Oct 15 2018, 12:26 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
Merijn added a comment to T904: BGP process does not start a boot.

Trying to reproduce it by doing a reboot with a working BGP config i now have lost during the reboot all interface and firewall configuration.
But the BGP config is now present and loaded.
:-(

Oct 15 2018, 11:54 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
Merijn updated the task description for T904: BGP process does not start a boot.
Oct 15 2018, 11:34 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)
Merijn created T904: BGP process does not start a boot.
Oct 15 2018, 11:31 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-EPA3)

Sep 27 2018

Merijn added a comment to T865: Add initial RPKI support.

That would be very nice to be able to use.
I just tested the rolling image and when i try to start bgpd with this module loaded it cannot find it.

Sep 27 2018, 6:49 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-GA)

Sep 19 2018

Merijn added a comment to T852: Router responding to arp requests for all addresses, breaks Windows networking!.

I found this to occur sometimes when you configure the same subnet on multiple interfaces. The IPv4 seems to be OK in your config but the IPv6 is hidden and missing the last digit as well.
Also maybe you have created some strange behaving rule in NAT, if you have NAT configured could you post this config, or run through it yourself?

Sep 19 2018, 7:09 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc2)

Aug 25 2018

Merijn changed the status of T800: FRR route-map ipv6-next-hop fix from Open to In progress.
Aug 25 2018, 8:38 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc3)
Merijn created T800: FRR route-map ipv6-next-hop fix.
Aug 25 2018, 8:37 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc3)
Merijn created T799: In the FRR image community-list is not handled correctly.
Aug 25 2018, 7:52 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc4)

Aug 24 2018

Merijn created T798: FRR show ipv6 bgp moved to show ip bgp ipv6.
Aug 24 2018, 11:44 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
Merijn changed the status of T795: IPv6 static route issue 1.2.0 frr image from Open to In progress.
Aug 24 2018, 11:07 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
Merijn added a comment to T795: IPv6 static route issue 1.2.0 frr image.

I believe i found the cause in the following issue on FRRouting
https://github.com/FRRouting/frr/issues/1440

Aug 24 2018, 11:06 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
Merijn created T796: Commit error after upgrade from 1.1.8 to 1.2.0-20180824-frr.
Aug 24 2018, 2:22 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
Merijn added a comment to T795: IPv6 static route issue 1.2.0 frr image.

My impression was that is was related to the adding of ipv6-next-hop to a route-map.
But without the IPv6 static routes the config commits fine.
When adding the first IPv6 static route the error is shown.

Aug 24 2018, 2:13 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
Merijn created T795: IPv6 static route issue 1.2.0 frr image.
Aug 24 2018, 1:48 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

Jun 30 2018

Merijn added a comment to T166: NPTv6 Broken - 999.201609170235.

I also tested it on latest rolling and it is not working. It however does change something because when i enable it i can no longer ping from the Vyos router to the gateway.

Jun 30 2018, 8:30 AM · VyOS 1.3 Equuleus
Merijn added a comment to T666: Define new VRRP syntax.

RFC compatibility settings prevents VRRP from working on Hyper-V because of promiscuous on NICs
Without the RFC compatibility this is working fine.

Jun 30 2018, 8:28 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)
Merijn added a comment to T616: Migrate to keepalived 2.x (including IPv6 VRRP).

Option 2 seems best. VRRP version does not need a setting, use VRRP V2 when no vrrp6 block is present for backward compatibility. Use VRRP v3 when it is.

Jun 30 2018, 8:22 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1)

May 16 2018

Merijn created T645: Allow multiple prefixes in ipsec tunnel.
May 16 2018, 12:54 PM · VyOS 1.3 Equuleus

May 7 2018

Merijn added a comment to T252: VTI tunnel SA is incorrectly displayed as down when it's in fact up.

Tested on 1.2.0-rolling

May 7 2018, 1:11 PM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc8)

Apr 23 2018

Merijn added a comment to T607: Cannot boot on HyperV.

I am running several Vyos instances on Hyper-V and can confirm that 1.1.7 and 1.1.8 are running without issues.
For memory we use 512MB and never have any issues.

Apr 23 2018, 5:43 PM · Rejected

Dec 1 2017

Merijn added a comment to T306: Migration from vyatta-quagga to FRR.

The current Quagga included is rather old, so if it is possible to migrate to FRR that would make a big difference.
I am testing my configs in the alpha release and so far it looks good. To assist i can test setups and configs.

Dec 1 2017, 8:19 AM · VyOS-1.2.0-GA, VyOS 1.2 Crux (VyOS 1.2.0-rc1), vyos-frr

Nov 8 2017

Merijn added a comment to T447: show ip bgp neighbor x.x.x.x advertised-routes empty.

It seems this is a bug in FRR 3.0
https://github.com/FRRouting/frr/issues/509

Nov 8 2017, 10:10 PM · Rejected
Merijn created T447: show ip bgp neighbor x.x.x.x advertised-routes empty.
Nov 8 2017, 9:56 PM · Rejected

May 12 2017

Merijn added a comment to T38: Add no-ipv4-unicast option.

@syncer @dmbaturin
I found the following discussion on Cisco forum very explainable
https://supportforums.cisco.com/discussion/11476526/when-use-bgp-address-family

May 12 2017, 7:59 AM · VyOS 1.3 Equuleus

Apr 17 2017

Merijn added a comment to T299: ssh-server-key missing.

I manually added the file from Diffusion and this works, but i do not know how to fix this in the source :-)
https://phabricator.vyos.net/diffusion/2/browse/master/scripts/ssh-server-key;970ff0cfe393ccfa63d1f875483f3df7543d6c62

Apr 17 2017, 10:54 AM
Merijn created T299: ssh-server-key missing.
Apr 17 2017, 10:46 AM

Feb 9 2017

Merijn added a comment to T246: bgpd crash.

At this moment i am not running the nightly build so i cannot get this information for you. In a week or so i can change it to nightly build and let it run.

Feb 9 2017, 9:40 PM · Invalid

Jan 10 2017

Merijn added a comment to T217: Cron error.

I checked a couple of routers and every router without IPSec configured has this error, but every router with IPSec configured had this file so no errors.

Jan 10 2017, 9:20 PM · VyOS 1.1.x (1.1.8)

Jan 9 2017

Merijn added a comment to T196: snmpd crash.

I noticed that both routers having the SNMP issues are the VRRP masters. I switches VRRP to Backup en rebooted the routers. SNMP daemon seems stable at this moment.

Jan 9 2017, 10:23 PM · Rejected
Merijn created T246: bgpd crash.
Jan 9 2017, 9:25 PM · Invalid

Jan 5 2017

Merijn added a comment to V3: Tag node syntax for VyOS 2.0.

@rps this distinction also seems to be easy in the original proposed solution by @dmbaturin because key value pairs are not followed by '{' and the rest is.

Jan 5 2017, 1:57 PM · VyOS 2.0.x, VyConf
Merijn added a comment to V3: Tag node syntax for VyOS 2.0.

@dmbaturin I understand that the discussion is "unit 0" vs "unit { 0", what i meant was that i could be an option to keep following the JunOS style as much as possible to maybe enable more interoperability.

Jan 5 2017, 1:29 PM · VyOS 2.0.x, VyConf
Merijn added a comment to V3: Tag node syntax for VyOS 2.0.

Well plain JSON would also be an option then :-)

Jan 5 2017, 1:27 PM · VyOS 2.0.x, VyConf
Merijn added a comment to V3: Tag node syntax for VyOS 2.0.

In the blog post #7 i liked the address [ 192.168.2.1/24 10.10.10.1/30 ]; part. But since i work most of the time with mixed JunOS and Vyos environments a mostly the same syntax would be very nice :-)
However JunOS would be:

Jan 5 2017, 1:19 PM · VyOS 2.0.x, VyConf
Merijn added a comment to V3: Tag node syntax for VyOS 2.0.

A pro for me would be that i can do 'edit interfaces ethernet eth0 vif' and work with all virtual interfaces.

Jan 5 2017, 12:36 PM · VyOS 2.0.x, VyConf

Jan 4 2017

Merijn added a comment to V2: Should VyOS-specific shell be the login shell in VyOS 2.0?.

In JunOS the root user enters in the shell and uses 'cli' to enter show mode followed by configure for config mode.
When i add an extra user without shell access, this user is placed directly into show mode.
The vyos user is not the root user, so the way it currently is makes perfect sense to me.

Jan 4 2017, 10:23 PM · VyOS 2.0.x

Jan 2 2017

Merijn added a comment to T196: snmpd crash.

These are the details of the router with issues:

  1. ROUTER2:~$ show hardware cpu
  2. Architecture: x86_64
  3. CPU op-mode(s): 32-bit, 64-bit
  4. CPU(s): 4
  5. Thread(s) per core: 1
  6. Core(s) per socket: 4
  7. CPU socket(s): 1
  8. NUMA node(s): 1
  9. Vendor ID: GenuineIntel
  10. CPU family: 6
  11. Model: 30
  12. Stepping: 5
  13. CPU MHz: 2393.940
  14. Virtualization: VT-x
  15. L1d cache: 32K
  16. L1i cache: 32K
  17. L2 cache: 256K
  18. L3 cache: 8192K
  19. ROUTER2:~$ show hardware dmi
  20. bios_date: 09/10/2013
  21. bios_vendor: Dell Inc.
  22. bios_version: 1.10.0
  23. board_asset_tag:
  24. board_name: 05KX61
  25. board_vendor: Dell Inc.
  26. board_version: A02
  27. chassis_asset_tag:
  28. chassis_type: 23
  29. chassis_vendor: Dell Inc.
  30. chassis_version:
  31. product_name: PowerEdge R210
  32. product_version:
  33. sys_vendor: Dell Inc.
  34. ROUTER2:~$ show hardware pci
  35. 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
  36. 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
  37. 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
  38. 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
  39. 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
  40. 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
  41. 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
  42. 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
  43. 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
  44. 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
  45. 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
  46. 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5)
  47. 00:1f.0 ISA bridge: Intel Corporation 3400 Series Chipset LPC Interface Controller (rev 05)
  48. 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
  49. 01:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
  50. 01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
  51. 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
  52. 02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
  53. 03:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 (rev 0a)
  54. ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
  55. ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
  56. ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
  57. ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
  58. ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
  59. ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
  60. ff:03.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
  61. ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
  62. ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
  63. ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
  64. ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
  65. ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
  66. ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
  67. ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
  68. ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
  69. ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
  70. ROUTER2:~$ show hardware scsi
  71. [0:0:0:0] disk ATA SAMSUNG HD501LJ CR10 /dev/sda
  72. [1:0:0:0] disk ATA SAMSUNG HD501LJ CR10 /dev/sdb
  73. [3:0:0:0] cd/dvd TEAC DVD-ROM DV-28SW R.2A /dev/sr0
  74. ROUTER2:~$ show hardware usb
  75. Bus 002 Device 005: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
  76. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
  77. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  78. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  79. ROUTER2:~$ show system routing-daemons
  80. zebra ripd ripngd ospfd ospf6d bgpd #
  81. ROUTER2:~$ show system image
  82. The system currently has the following image(s) installed:
  83. 1: VyOS-1.1.7 (default boot) (running image) #
  84. ROUTER2:~$ show version all
  85. Version: VyOS 1.1.7
  86. Description: VyOS 1.1.7 (helium)
  87. Copyright: 2016 VyOS maintainers and contributors
  88. Built by: maintainers@vyos.net
  89. Built on: Wed Feb 17 09:57:31 UTC 2016
  90. Build ID: 1602170957-4459750
  91. System type: x86 64-bit
  92. Boot via: image
  93. HW model: PowerEdge R210
  94. HW S/N: 507645J
  95. HW UUID: 44454C4C-3000-1037-8036-B5C04F34354A
Jan 2 2017, 8:04 PM · Rejected
Merijn reopened T196: snmpd crash as "Open".
Jan 2 2017, 7:57 PM · Rejected
Merijn added a comment to T196: snmpd crash.

The configs on all the routers are roughly the same, the SNMP config is completely the same.
I will collect the hardware details.

Jan 2 2017, 7:57 PM · Rejected
Merijn created T242: Snmpd smuxpeer not working.
Jan 2 2017, 7:48 PM
Merijn created T241: Snmpd IfAlias issue on nightly build.
Jan 2 2017, 7:39 PM · Rejected

Nov 24 2016

Merijn created T196: snmpd crash.
Nov 24 2016, 8:50 AM · Rejected