Some internal test where done, using integration between:

• Traffic shaper. Currently supported in vyos cli
• Bridge firewall. Currently not supported in vyos cli.

It seems to exist for current Debian 12.1 (bookworm) so I think it should be a relativily simple task to add that if not already existing:

I admit my setup isn't really the most common for production, but for the home lab crowd it might be ok. Realtek makes many network chip models I assume and their implementation might also vary from board manufacturer to another.
About not using VMware - that's a tougher ask :)

Nope, now i had to do

@aalmenar could you test this patch?

information that can be useful for this feature request :

@c-po Tried with latest rolling 1.4-rolling-202308060317, rpki doesn't start automatically, one must do:

Latest rolling uses FRR 9.0. - could you re-test it please?

Running into this as well on: 1.4-rolling-202307260317

Cherry-pick https://github.com/vyos/vyos-1x/pull/2125

PR: https://github.com/vyos/vyos-1x/pull/2108
PR: https://github.com/vyos/vyos-build/pull/372

Fix for 1.4: https://github.com/vyos/vyos-1x/pull/2109

Am I supposed to create data/template/dhcp-client/dhcp6c_daemon-options.j2 by hand? I tried to run make to try and create the template, then go from there & fill out the template like in daemon-options.j2. But my dev env is borked, and I'm starting to think that inside a VyOS instance is also where I'm supposed to do this.

PR for 1.3: https://github.com/vyos/vyos-1x/pull/2106

To reproduce the problem:

FRR does not support it
Allows only full multicast table

r11# clear ip 
...
  mroute       IP multicast routing table

PR https://github.com/vyos/vyos-1x/pull/2101

The issue is actual.
I reproduced it. SSH was accessible at this moment. And sftp server was accessible too.

Fixed with enabling offloads https://vyos.dev/T3619

vyos@r14# set interfaces ethernet eth0 offload 
Possible completions:
   gro                  Enable Generic Receive Offload
   gso                  Enable Generic Segmentation Offload
   lro                  Enable Large Receive Offload
   rfs                  Enable Receive Flow Steering
   rps                  Enable Receive Packet Steering
   sg                   Enable Scatter-Gather
   tso                  Enable TCP Segmentation Offloading

Also, correct behavior when 1 interface is pppoe, and other dhcp-client:

Test #1:

• Simple configuration with one interface pppoe and other static, WLB working as expected:

It possible with

set protocols bgp 65001 parameters default no-ipv4-unicast

I fixed this in https://github.com/vyos/vyos-1x/pull/995 but must not have updated this task to reflect that.