I can't reproduce it in 1.2.7 and VyOS 1.3-beta-202105272051
- Queries
- All Stories
- Search
- Advanced Search
- Transactions
- Transaction Logs
Advanced Search
Jun 7 2021
@jingyun Can you describe steps on how to reproduce it? Or re-check it.
My test config after reboot works fine
set interfaces bridge br0 member interface tun0 set interfaces tunnel tun0 encapsulation 'gre-bridge' set interfaces tunnel tun0 local-ip '100.64.0.1' set interfaces tunnel tun0 remote-ip '100.64.0.254'
Jun 2 2021
Waiting for T3595 to clear up before I can test this on rolling release.
May 30 2021
May 29 2021
We have had a lot of tickets about SNMP MIBS for BGP - most of them beeing for IPv6.
root@r2-lts:/home/vyos# snmpget -v 2c -c public 192.168.122.11 IF-MIB::ifAdminStatus.1 IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
May 25 2021
May 24 2021
May 20 2021
May 19 2021
May 18 2021
May 17 2021
May 15 2021
May 14 2021
Can be "cherry picked" to 1.3 and 1.2
May 13 2021
PR https://github.com/vyos/vyos-1x/pull/840
Can be "cherry-picked" to "equuleus" and "crux"
vyos@r6-roll# load ntp.conf Loading configuration from 'ntp.conf' Load complete. Use 'commit' to make changes effective. [edit] vyos@r6-roll#
May 9 2021
May 7 2021
May 5 2021
Apr 28 2021
For crux we use parser of " ipsec statusall {peer}"
Output if IKE established and esp SA not installed
vyos@r2-lts:~$ sudo ipsec statusall peer-192.0.2.1-tunnel-vti | grep Connections -A 50 Connections: peer-192.0.2.1-tunnel-vti: 192.0.2.2...192.0.2.1 IKEv1 peer-192.0.2.1-tunnel-vti: local: [192.0.2.2] uses pre-shared key authentication peer-192.0.2.1-tunnel-vti: remote: [192.0.2.1] uses pre-shared key authentication peer-192.0.2.1-tunnel-vti: child: 0.0.0.0/0 === 0.0.0.0/0 TUNNEL Security Associations (2 up, 0 connecting): peer-192.0.2.1-tunnel-vti[3]: ESTABLISHED 12 minutes ago, 192.0.2.2[192.0.2.2]...192.0.2.1[192.0.2.1] peer-192.0.2.1-tunnel-vti[3]: IKEv1 SPIs: 0ab8c2ee5815350e_i 271fba46aab245da_r*, pre-shared key reauthentication in 29 minutes peer-192.0.2.1-tunnel-vti[3]: IKE proposal: AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024
Apr 18 2021
Apr 13 2021
Apr 12 2021
Thanks!
@danhusan that PR was only done to current and not backported. I just packported it to the crux branch.
The reason these validations https://github.com/vyos/vyos-1x/blob/aca3254d96d01cc37c9e15e02e500a36f3708959/interface-definitions/vrrp.xml#L220-L224
There is no such problem in version 1.4.
@c-po I expected this to go into 1.2.7 but it did not. How would I tag this properly so it hopefully makes it into 1.2.8?
Apr 10 2021
Apr 9 2021
Apr 8 2021
Apr 5 2021
Apr 3 2021
Mar 14 2021
A migration script is available from 1.3 onwards.
Sadly, this isn't a trivial update due to dependencies. However, Microsoft's own documentation says the version that is unsupported for real is 2.2.10, and 2.20 is still supported, even if they recommend the very latest one.
This is a config syntax design mistake on our side indeed. The "preference" option should have always been under "cache".