moved get functions into properties, for ifalias, macaddr and mtu to see how it works. If the old get_ function is being used, it prints a message to the console but still works. Will see how well that works.
https://github.com/vyos/vyos-1x/commit/0b9c894fcece6df553a89e42147768ce6efaf372

On vyos-1.2-rolling-201908201244-amd64.iso won`t reproduce. All ok, configuration edits are applied.

Hello, this function works great, but I think it could be better if we can specify a custom OID for each custom script. For exemple, LibreNMS needs to have specific OID to make automatic OS/hardware detection working : https://docs.librenms.org/Support/SNMP-Configuration-Examples/#linux-snmpd-v2
Thank you.

Backported to crux

@hagbard can you take a look if that was backported?

Still seeing this bug in 1.2.2. VyOS config has weights configured, but in the FRR config, weight is missing.

Please review PRs in vyos-1x and vyatta-op.

I just tested again.
Running on rolling VyOS-1.2-201908130337, same config as before, recursor.conf is ok.
Updated VyOS to rolling VyOS-1.2-201908190337, reboot, check recursor.conf. The domain forwarding is missing.
Reboot again, it's back in the recursor.conf.

I've also tested this on the newly released dune1.11.1 with the same result

Also the subtask T1524 should be part of this migration script as if the new allow-from node does not exist it should be populated by the current hard-coded addresses of 0.0.0.0/0 and ::/0

Using 1.2-rolling-201908171107 I configured:

set service dns forwarding domain example.com server '172.16.10.1'
set service dns forwarding listen-address '172.18.201.10'
set service dns forwarding name-server '1.1.1.1'

1. OpenVPN site-to-site

This error won't be fixed as the new Python/XML implementation of OpenVPN has been merged into current and will appear in the next rolling release.

This is actually invalid. There is no way with the current CLI design to specify the local address node with an optional subnet-mask leaf node.

Hello Harliff,

We also can add show protocols bfd peer counters and for peer show protocols bfd peer x.x.x.x counters

vyos@vyos-rtr01# run show protocols bfd peer counters | strip-private 
BFD Peers:
	peer xxx.xxx.0.4 local-address xxx.xxx.0.1 vrf default
		Control packet input: 0 packets
		Control packet output: 988 packets
		Echo packet input: 0 packets
		Echo packet output: 0 packets
		Session up events: 0
		Session down events: 0
		Zebra notifications: 0

A note when stating to convert physical interfaces.

I've made some hacks to get vyatta-config-sync working with ssh-keys (and working at all).