T2100

PR https://github.com/vyos/vyos-1x/pull/685

Fixed in VyOS 1.4-rolling-202101160747 and VyOS 1.3-beta-202101160442

Better document improvement

If you could extend the smoketest that would be even better, local test is okay, too

Quoted Text

If I use

Reverted to 7.3 let's wait for the fix to pop up in 7.5 FRR branch and we can try again.

This can be fixed by copying the two profile directories you're using (/usr/lib/tuned/network-throughput and /usr/lib/tuned/network-latency) to /etc/tuned and changing the sysctl section to only contain enabled=false. Here's it working:

root@cr01a-vyos:~# diff /usr/lib/tuned/network-latency/tuned.conf /etc/tuned/network-latency/tuned.conf
13,16c13
< net.core.busy_read=50
< net.core.busy_poll=50
< net.ipv4.tcp_fastopen=3
< kernel.numa_balancing=0
---
> enabled=false
root@cr01a-vyos:~# diff /usr/lib/tuned/network-throughput/tuned.conf /etc/tuned/network-throughput/tuned.conf 
10,16c10
< # Increase kernel buffer size maximums.  Currently this seems only necessary at 40Gb speeds.
< #
< # The buffer tuning values below do not account for any potential hugepage allocation.
< # Ensure that you do not oversubscribe system memory.
< net.ipv4.tcp_rmem="4096 87380 16777216"
< net.ipv4.tcp_wmem="4096 16384 16777216"
< net.ipv4.udp_mem="3145728 4194304 16777216"
---
> enabled=false

Do I need to test the image before closing the task? I'm on a older image version and I manually applied the patch which works. Otherwise I'd need to upgrade the image which I won't have time for in the near future.

Fixed in the new bgp format, VyOS 1.4-rolling-202101150632

CLI command will be: set interfaces tunnel tun10 parameters ip no-pmtu-discovery, Also PMTU can not be changed in IPv6 sourced tunnels, a validation check has been added.

As of T3218 we no longer utilize the out-of-tree drivers as there is no performance gain. Both current and equuleus branch (1.4 and 1.3) not use the Linux Kernel stock drivers.

Backported to equuleus branch

Backported to equuleus branch

Backported to equuleus

Fixed VyOS 1.4-rolling-202101150632

set protocols isis FOO interface eth1 no-three-way-handshake
set protocols isis FOO net '49.0001.1921.6800.1002.00'

PR https://github.com/vyos/vyos-1x/pull/684

If it's just because of overlay, you can merge two XML into one XML

It seems the problem not solved, "show ipv6 route" declared in different XML scripts, so one of them rewrites another.

@GregGreg you describe definitely another issue that needs another topic. Will be better to discuss troubleshooting on the forum.
As for this topic, I pan to add some checks in the verify function.

PR https://github.com/vyos/vyos-1x/pull/683

In T915#83668, @daniil wrote:

In T915#81521, @Cheeze_It wrote:

See if you can get absolute latest and see if it works...

net.mpls.conf.X.input variable is not set after reboot.

https://github.com/vyos/vyatta-cfg-system/commit/0dccb303c09069ab3997a508f18d1e94f9332f90

@runar good catch, file restored!

backported to equuleus

backported to equuleus

It was my bad, sorry

I was having this issue and I can confirm it's fixed for me in the latest rolling

PR https://github.com/vyos/vyos-1x/pull/680

Was fixed here https://github.com/vyos/vyos-1x/commit/ea1be032e98fd1634e71d3c2d61b3e93bff841de

Yep, I use RADIUS.

Some days ago a cleanup was done on 1.4 to clean away some old legacy code, it looks like this cleanup has removed a bit to much...
https://github.com/vyos/vyatta-cfg-system/pull/136